Description: The MIC2169A is a high-efficiency, sim...
MIC2169A General Description
The MIC2169A is a high-efficiency, simple to use 500kHz PWM synchronous buck control IC housed in a small MSOP-10 package. The MIC2169A allows compact DC/DC solutions with a minimal external component count and cost. The MIC2169A operates from a 3V to 14.5V input, without the need of any additional bias voltage. The output voltage can be precisely regulated down to 0.8V. The adaptive all N‑Channel MOSFET drive scheme allows efficiencies over 95% across a wide load range. The MIC2169A senses current across the high-side N-Channel MOSFET, eliminating the need for an expensive and lossy current-sense resistor. Current limit accuracy is maintained by a positive temperature coefficient that tracks the increasing RDS(ON) of the external MOSFET. Further cost and space are saved by the internal in-rush-current limiting digital soft-start. The MIC2169A is available in a 10-pin MSOP package, with a wide junction operating range of 40°C to +125°C. All support documentation can be found on Micrel’s web site at www.micrel.com.
The MIC2169 is a high-efficiency, simple to use 500kHz PWM synchronous buck control IC housed in a small MSOP- 10 package. The MIC2169 allows compact DC/DC solutions with a minimal external component count and cost.The MIC2169 operates from a 3V to 14.5V inp...
The MIC2168A is a high-effi ciency, simple to use 1MHz PWMsynchronous buck control IC housed in a small MSOP-10package. The MIC2168A allows compact DC/DC solutionswith a minimal external component count and cost.The MIC2168A operates from a 3V to 14.5V inp...