Purchase MIC2776N-BM5, In-stock MIC2776N-BM5 From SeekIC.
MFG:Micrel D/C:07+


Part Number: MIC2776N-BM5
MFG: Micrel
D/C: 07+
Description: The MIC2776 is a power supply supervisor which provides under-voltage monitoring and power-on reset ge...
MFG:Micrel D/C:07+


MFG: Micrel
D/C: 07+
Description: The MIC2776 is a power supply supervisor which provides under-voltage monitoring and power-on reset ge...
The MIC2776 is a power supply supervisor which provides under-voltage monitoring and power-on reset generation in a compact 5-pin SOT package. Features include an adjustable under-voltage detector, a delay-generator, a manual reset input, and a choice of active-high, active-low, or open-drain active-low reset output. The user-adjustable monitoring input is compared against a 300mV reference. This low reference voltage allows monitoring voltages lower than those sup- ported by previous supervisor ICs.
The reset output is asserted for no less than 140ms at power- on and any time the input voltage drops below the reference voltage. It remains asserted for the timeout period after the input voltage subsequently rises back above the threshold boundary. A reset can be generated at any time by asserting the manual reset input, /MR. The reset output will remain active at least 140ms after the release of /MR. The /MR input can also be used to daisy-chain the MIC2776 onto existing power monitoring circuitry or other supervisors. Hysteresis is included to prevent chattering due to noise. Typical supply current is a low 3.0A.
MIC2776N-BM5
PDF/DataSheet Download








