MIC5210-3.0BMM

Series: -
Regulator Topology: Positive Fixed
Current - Limit (Min): -
Mounting Type: Surface Mount
Operating Temperature: -40°C ~ 125°C
Voltage - Output: 3V
Current - Output: 150mA
Package / Case: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package: 8-MSOP
Number of Regulators: 2
Packaging: Tube
Voltage - Input: 2.5 V ~ 16 V
Manufacturer: Micrel Inc
Voltage - Dropout (Typical): 0.165V @ 150mA


Features:

• Micrel Mini 8™ MSOP package
• Guaranteed 100mA outputs
• Low quiescent current
• Low dropout voltage
• Wide selection of output voltages
• Tight load and line regulation
• Low temperature coefficient
• Current and thermal limiting
• Reversed input polarity protection
• Zero off-mode current
• Logic-controlled electronic enable


Application

• Cellular telephones
• Laptop, notebook, and palmtop computers
• Battery powered equipment
• Bar code scanners
• SMPS post regulator/dc-to-dc modules
• High-efficiency linear power supplies Typical Application


Pinout




Specifications

Supply Input Voltage (V_IN) ............................ 20V to +20V
Enable Input Voltage (V_EN) ........................... 20V to +20V
Power Dissipation (P_D) ............................ Internally Limited
Storage Temperature Range ................... 60°C to +150°C
Lead Temperature (soldering, 5 sec.) ....................... 260°C


Description

The MIC5210 is a dual linear voltage regulator with very low dropout voltage (typically 10mV at light loads and 140mV at 100mA), very low ground current (225mA at 10mA output), and better than 3% initial accuracy. MIC5210 also features individual logic-compatible enable/shutdown control inputs.

Designed especially for hand-held battery powered devices,the MIC5210 can be switched by a CMOS or TTL compatible logic signal, or the enable pin can be connected to the supply input for 3-terminal operation. When disabled, power consumption drops nearly to zero. Dropout ground current is minimized to prolong battery life.

Key features of MIC5210 include current limiting, overtemperature shutdown,and protection against reversed battery.

The MIC5210 is available in 3.0V, 3.3V, 3.6V, 4.0V and 5.0V fixed voltage configurations. Other voltages are available;
contact Micrel for details.

Parameters:

Technical/Catalog Information	MIC5210-3.0BMM
Vendor	Micrel Inc
Category	Integrated Circuits (ICs)
Regulator Type	Multiple Output
Package / Case	8-MSOP, Micro8?, 8-uMAX, 8-uSOP,
Packaging	Tube
Regulator Topology	Positive Fixed
Current - Output	150mA
Voltage - Output	3V
Operating Temperature	-40°C ~ 125°C
Voltage - Input	2.5 ~ 16 V
Number of Regulators	2
Current - Limit (Min)	320mA
Current Short Circuit (Isc)	-
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	MIC5210 3 0BMM MIC521030BMM