Purchase ML7050LA, In-stock ML7050LA From SeekIC.


Part Number: ML7050LA
Description: The Oki ML7050LA is a highly integrated BluetoothTM radio transceiver designed to operate in the globa...


Description: The Oki ML7050LA is a highly integrated BluetoothTM radio transceiver designed to operate in the globa...
The Oki ML7050LA is a highly integrated BluetoothTM radio transceiver designed to operate in the global 2.4 GHz Industrial, Scientific, and Medical (ISM) band. The ML7050LA architecture incorporates vital intermediate frequency (IF) and radio frequency (RF) circuits on a low cost, integration-friendly bulk CMOS process.
Bluetooth technology directly supports short range, wireless voice and data communications with 1 Mbps throughput performance in the public ISM band across many applications, employing rapid frequency hopping (1.6K hops/s) spread spectrum (FHSS) approach. The ML7050LA highly integrated CMOS Bluetooth RF transceiver LSI will establish a 2.4 to 2.5 GHz communication link compliant with Bluetooth Specification Version 1.1 and is packaged in the Oki 48-pin ball grid array (BGA) package requires only 7 mm x 7 mm of the systems critical board space.
Oki's Bluetooth LSI family includes baseband LSI (ML70511LA), System Development Kit (BT-SDK), firmware and software (BTS Pack1/2/3). Together, the RF LSI (ML7050LA) and baseband (ML70511LA) devices form a complete hardware solution optimized for low system cost, small form factor, and reduced power consumption Bluetooth applications.
|
Parameter |
Symbol |
Conditions |
Rated Value |
Unit |
|
Power Supply Voltage |
VDD |
Ta = 25°C |
0.3 to 4.5 |
V |
|
Input Voltage |
VI |
- |
0.3 to VDD +0.3 |
V |
|
Allowable power dissipation |
PD |
- |
0.5 |
W |
|
Storage temperature |
TSTO |
- |
55 to +150 |
°C |
|
Input RF Power |
- |
In-Band |
TBD |
dBm |
|
- |
Out-of-Band |
TBD |
dBm |
• Circuit design based on the Bluetooth Specification Version 1.1.
• CMOS process technology lowers system cost and simplifies future baseband integration
• Fully integrated CMOS RF LSI: TX/RX switch, power amplifier, LNA, image rejection mixer, VCO, PLL, gm-C IF filter, modulator, and demodulator.
• Low IF circuitry eliminates off-chip SAW filter reducing bill-of-material (BOM)
• Class 2 power operation compliant covering a wide range of applications
• Seamless interface with Oki's ML70511LA Bluetooth baseband controller LSI
• Power supply voltage: 2.7 to 3.3 V
• Package: 48-pin BGA (7 mm x 7 mm x 1.41mm)
ML7050LA
PDF/DataSheet Download








