MN101C39C

The MN101C39C is designed as one product of panasonic with internal ROM type id EPROM. Its ROM is 48K bytes and its RAM is 2k bytes. MN101C39C's package (lead free) is TQFP080-P-1212D. Its minimum instruction execution time would be 0.1us at 4.5V to 5.5V, 20MHz and would be 0.25us at 2.7V to 5.5V, 8MHz and would be 125us at 2.0V to 5.5V, 32MHz.

Some electrical characteristics of MN101C39C have been concluded into several points as follow. (1) operating supply IDD1 would be typ 8mA and max 25mA with condition of fosc=8MHz and Vdd=5V. (2) Its operating supply current IDD2 would be typ 18uA and max 100uA with condition of fx=32kHz, Vdd=3V. (3) Its supply current at HALT IDD3 would be typ 3uA and max 8uA with condition of fx=32kHz, VDD=3V and Ta=25°C. (4) Its supply current at HALT IDD4 would be max 25uA with condition of fx=32kHz, VDD=3V and Ta=-40°C to +85°C. (5) Its supply current at STOP IDD5 would be max 1uA with condition of VDD=5V and Ta=25°C and would be max 20uA with condition of VDD=5V and Ta=-40°C to +85°C.

Also some important specifications about MN101C39C. (1) Its interrupts is RESET, watchdog, external 0 to 4, timer 2 to 5, time base, serial 0, serial 1, A/D conversion finish. (2) Its serial interface serial 0 would be synchronous type/simple UART (half-duplex) x 1 and clock source is 1/2, 1/4, 1/16 of system clock frequency; 1/2 of timer counter 3 frequency. Serial 1 is synchronous type × 1 and clock source is 1/2, 1/8, 1/64 of system clock frequency; 1/2 of timer counter 3 frequency. (3) Its A/D converter is 10-bit × 8-ch. (with S/H). (4) Its display control function is LCD, 28 segments × 4 commons (static , 1/2, 1/3, or 1/4 duty). (5) Its special ports is buzzer output, remote control carrier signal output, high-current drive port. And so on. If you have any question or suggestion or want to know more information of MN101C39C  please contact us for details. Thank you!