MP2359DJ

The MP2359DJ is the evaluation board for the MP2359, a monolithic non-synchronous step-down switch mode converter with an integrated power MOSFET.The MP2359DJ achieves 1.2A continuous output current over a wide input supply range with excellent load and line regulation.Current mode operation provides fast transient response and eases loop stabilization.Fault condition protection includes cycle-by-cycle current limiting and thermal shutdown.The MP2359DJ is available in TSOT23-6 and SOT23-6 packages.

The MP2359DJ has four features.(1)1.2A output current.(2)wide 4.5V to 24V operating input range.(3)output adjustable from 0.8V to 15V.(4)fully assembled and tested.The MP2359DJ has five quick start guuides.(1)connect the positive terminal of the load to VOUT pin, and the negative terminal of the load to GND pin.(2)preset the power supply output to 4.5V 24V and turn off the power supply.(3)connect the positive terminal of the power supply output to the VIN pin and the negative terminal of the power supply output to the GND pin.(4)turn the power supply on. The board will automatically startup.(5)to use the Enable function, apply a digital input to EN pin. Drive EN higher than 1.2V to turn on the regulator, drive EN less than 0.4V to turn it off.

The information in this document is subject to change without notice. Please contact MPS for current specifications.Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not assume any legal responsibility for any said applications.