MSR38D

The Minotaur MSR38D/DP is a microprocessor-based, monitoring safety relay, with delayed, safety-rated, solid state outputs.

The inputs of the MSR38D/DP are the same as the MSR30. They can be connected to gate interlocks, e-stop devices or 4-wire safety mats. The gate interlocks and e-stops can be either single channel or dual channel normally-closed circuits.

The reset capability of the MSR38D/DP allows it to set up for manual or automatic start and restart.

The outputs of MSR38D include two delayed normally-open safety rated outputs that can be connected to loads up to 2A at 24V DC. These outputs can be used to send a safety stop signal to a machine or manufacturing system. The delay is accomplished by the configuration of jumpers on the terminals. The delay of MSR38D can be easily adjusted by reconfiguring the jumpers.

The MSR38D/DP also has one solid state normally-closed auxiliary output, which must only be used to indicate the status of the MSR38D/DP. The auxiliary output responds immediately to the change in input status; it is not delayed.