Purchase MX315A, In-stock MX315A From SeekIC.


Part Number: MX315A
Description: The MX315A is a monolithic CMOS tone encoder for sub-audible tone squelch systems, which provides thre...


Description: The MX315A is a monolithic CMOS tone encoder for sub-audible tone squelch systems, which provides thre...
The MX315A is a monolithic CMOS tone encoder for sub-audible tone squelch systems, which provides three additional frequencies over the earlier MX315A. These frequencies are 69.3, 97.4 and 206.5Hz. The tone frequencies are derived from an input reference frequency. An on-chip inverter is provided to drive an external crystal circuit.
Tone selection is achieved through six programming inputs and two control inputs (which allow either a logic "1" or "0" to enable the device). A low distortion sinewave is generated at the TX Tone Output when the MX315A is enabled. The emitter follower output stage can source 1mW directly into a 600 load (0dBm). The MX315A is available in the following package styles: 16-pin SOIC (MX315ADW), 14-pin PDIP (MX315AP) and 14-pin CDIP (MX315AJ).
| General | Min. | Max. | Units |
| Supply Voltage | -0.3 | 7.0 | V |
| J / P /DW Packages | |||
| Total Allowable Device Dissipation at TAMB = 25 | 800 | mW | |
| Derating above 25 | 10 | mW/ above 25 | |
| Operating Temperature | 30 | +85 | |
| Storage Temperature | 55 | +125 |
| General | Min. | Max. | Units |
| Supply Voltage | -0.3 | 7.0 | V |
| J / P /DW Packages | |||
| Total Allowable Device Dissipation at TAMB = 25 | 800 | mW | |
| Derating above 25 | 10 | mW/ above 25 | |
| Operating Temperature | 30 | +85 | |
| Storage Temperature | 55 | +125 |
MX315A
PDF/DataSheet Download








