NC7WP240

Features:

*Space saving US8 surface mount package
*MicroPak(TM) Pb-Free leadless package
*0.9V to 3.6V VCC  supply operation
*3.6V overvoltage tolerant I/O's at VCC from 0.9V to 3.6V
*tPD
3.0 ns typ for 3.6V VCC
4.0 ns typ for 2.3V to 2.7V VCC
5.0 ns typ for 1.65V to 1.95V VCC
6.0 ns typ for 1.40V to 1.60V VCC
10.0 ns typ for 1.10V to 1.30V VCC
26.0 ns typ for 0.90V VCC
*Power-Off high impedance inputs and outputs Static Drive (IOH /IOL )
±2.6 mA @ 3.00V VCC
±2.1 mA @ 2.30V VCC
±1.5 mA @ 1.65V VCC
±1.0 mA @ 1.40V VCC
±0.5 mA @ 1.10V VCC
±20 A@ 0.9V VCC
*Uses patented Quiet Series(TM) noise/EMI reduction  circuitry
*Ultra low dynamic power


Pinout




Specifications

Supply Voltage (Vcc )	-0.5V to  +4.6V
DC Input Voltage (Vin )	-0.5V to  +4.6V
DC Output Voltage (Vout )
HIGH or LOW State (Note 2)	-0.5V to VCC +0.5V
Vcc=0V	-0.5V to  +4.6V
DC Input Diode Current (Iik ) Vin<0V	±50 mA
DC Output Diode Current (Iok )
Vout<0V	-50 mA
Vout>Vcc	+50 mA
DC Output Source/Sink Current (Ioh/Iol )	±50 mA
DC Vcc  or Ground Current per
Supply Pin (Icc  or Ground)	±50 mA
Storage Temperature Range (Tstg )	-65 to  +150

Description

The NC7WP240 is a Dual Inverting Buffer with independent active LOW enables for the 3-STATE outputs. The Ultra High Power device is ideal for applications where battery life is critical. This product is designed for ultra low power consumption within the VCC  operating range of 0.9V to 3.6V VCC.

The internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power.The NC7WP240 for lower drive requirements, is uniquely designed for optimized power and speed, and is fabricated  with an advanced CMOS technology to achieve best in class speed operation while maintaining extremely low CMOS power dissipation.