NCS2200

Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.
1. The maximum package power dissipation limit must not be exceeded.
PD = TJ(max) - TA
                RJA
2. ESD data available upon request.
3. For more information, refer to application note, AND8080/D.

The NCS2200 Series is an industry first sub−one volt, low power comparator family. These devices consume only 10
A of supply current. They are guaranteed to operate at a low voltage of 0.85 V which allows them to be used in systems that require less than 1.0 V and are fully operational up to 6.0 V which makes them convenient for use in both 3.0 V and 5.0 V systems. Additional features include no output phase inversion with overdriven inputs, internal hysteresis, which allows for clean output switching, and rail−to−rail input and output performance. The NCS2200 Series is available in the tiny SOT−23−5 and SOT−23−6 package. There are eight options featuring two industry standard pinouts. Additionally, the NCS2200 device is available in the tiny QFN 2x2.2 package and the SC70−5 package. (Table 1)

The NCS2200 Series in the SOT−23−6 package features an enable function, which can be externally controlled. When the enable pin is pulled low (output tri−state mode), current consumption is typically 0.3
A. This allows the user to implement these devices in power sensitive applications such as portable electronics.