NJG1301

The NJG1301 is designed as GaAs MMIC mainly for driver amplifier of PHS base station in Japan. It has input and output matching circuits internally, and it features low voltage and high efficiency operation. 21dBm output power is easily available with very low distorition.

It has seven features. (1)Low voltage operation (Vdd=3.0V). (2)Input and output internal matching circuits. (3)Low distortion (Pacp=-60dBc typ at 1.9GHz, 21dBm.). (4)Low current consumption (Idd=185mA typ at 1.9GHz, 21dBm). (5)Reduction of parasitic oscillation. (6)V type: SSOP14 and maximum power dissipation is 600mW. (7)E type: EMP14 and maximum power dissipation is 1000mW. Those are all the main features.

Some absolute maximum ratings have been concluded into several points as follow. (1)Its drain voltage would be 6V. (2)Its gate voltage would be -4V. (3)Its input power would be 10dBm. (4)Its power dissipation would be 600mW for V type and 1000mW for E type. (5)Its operating temperature range would be from -30°C to 85°C. (6)Its storage temperature range would be from -40°C to +150°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics are concluded as follow. (1)Its operating frequency would be min 1.89GHz and max 1.92GHz. (2)Its drain voltage would be min 2.9V and typ 3.0V and max 5.0V. (3)Its gate voltage would be min -1.25V and typ -0.9V and max -0.6V. (4)Its idle current would be min 165mA and typ 170mA and max 175mA. (5)Its operating current would be min 170mA and typ 185mA and max 195mA. (6)Its gate current would be min -150uA and typ -70uA. (7)Its small signal gain would be min 20dB and typ 23dB and max 26dB. (8)Its gain flatness would be min 0 and typ 0.5dB and max 1.0dB. (9)Its Pout at 1dB compression would be min 21dBm and typ 22dBm. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!