MFG:PHILIPS Package Cooled:06+ D/C:5000
MFG: PHILIPS
Package Cooled: 06+
D/C: 5000
Description: The PDIUSBP11 is a one chip generic USB transceiver. It is designed to allow 5.0V or 3.3V programmable...
The PDIUSBP11 is a one chip generic USB transceiver. It is designed to allow 5.0V or 3.3V programmable and standard logic to interface with the physical layer of the Universal Serial Bus. It is capable of transmitting and receiving serial data at both full speed (12Mbit/s) and low speed (1.5Mbit/s) data rates. The outputs from the serial interface engine (inputs VPO and VMO on the PDIUSBP11) are driven by the host. The gated inputs (outputs VP and VM on the PDIUSBP11) are to be decoded by the host.
Implementation of the Serial Interface Engine along with the USB transceiver allow the designer to make flexible USB compatible devices with widely available logic components.
|
SYMBOL |
PARAMETER |
CONDITIONS |
LIMITS |
UNIT | |
|
MIN |
MAX | ||||
|
VCC |
DC supply voltage |
0.5 |
+6.5 |
V | |
|
IIK |
DC input diode current |
VI < 0 |
50 |
mA | |
|
VI |
DC input voltage |
Note 3 |
0.5 |
+5.5 |
V |
|
VI/O |
DC input voltage range for I/O's |
0.5 |
VCC +0.5 |
V | |
|
IOK |
DC output diode current |
V0 > VO or VCC <O |
±50 |
mA | |
|
VO |
DC output voltage |
Note 3 |
0.5 |
VCC +0.5 |
V |
|
IO |
DC output source or sink current for VP/VM,RCV pins |
VO = 0 to VCC |
±50 |
mA | |
|
IO |
DC output source or sink current for D+/Dpins |
VO = 0 to VCC |
±50 |
mA | |
|
IGND ,ICC |
DC VCC or GND current |
±100 |
mA | ||
|
Tstg |
Storage temperature range |
60 |
+150 |
||
|
Ptot |
Power dissipation per package |
mW | |||
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
3. The input and output voltage ratings may be exceeded if the input and output clamp current ratings are observed.
` Utilizes digital inputs and outputs to transmit and receive USB cable data
` Supports 12Mbit/s "Full Speed" and 1.5Mbit/s "Low Speed" serial data transmission
` Compatible with the VHDL "Serial Interface Engine" from USB developer's conference
` Available in SO, 14 pin package
` Hysteresis on D+, D, VMO inputs
PDIUSBP11
PDF/DataSheet Download
The Universal Serial Bus Hub PDIUSBH12 is a cost and feature optimized second generation USB Hub with 2 downstream ports and 3 embedded functions (compound hub). It is normally used in any microcontroller-based system and communicates with the system microco...
The Universal Serial Bus Hub PDIUSBH11A is a cost and feature optimized second generation USB Hub with 4 downstream ports and 3 embedded functions (compound hub). It is normally used in any microcontroller-based system and communicates with the system microc...
The Philips Semiconductors PDIUSBH11 is a compound USB hub IC (hub plus embedded function).PDIUSBH11 is used in a microcontroller based system and communicates with the system microcontroller over the I2C serial bus. This modular approach to implementing a h...
IC USB INTRFC W/PARL BUS 28TSSOP
IC USB INTRFC W/PARL BUS 28TSSOP
The PDIUSBD12PW is a cost and feature optimized USB device. The features of PDIUSBD12PW are: (1)Complies with the Universal Serial Bus specification Rev. 2.0 (basic speed); (2)High performance USB interface device with integrated SIE, FIFO memory, transceive...
Price: 0.01-0.02 USD
NPN, 5 GHz, wideband transistor, SOT23, High power gain, Low noise figure, Low intermodulation dis...
Price: 0.55-0.58 USD
2 poles, 1 to 2 A, relay
Price: 48-60 USD
power module, 500V, 60W
Price: 12-13 USD
Disk OnChip 2000, DIP, Low power consumption, 16MB to 576MB, Boot OS capability, 8KB sized memory ...
Price: 0.7-4 USD
DIP, programmable interval timer, -0.5 to +7 V, DC to 5MHz, 16 bit counters, Binary count, BCD
Price: 3-4 USD
dual 4-input positive-NAND gate, dip, –0.5 to 7 V, Low Power Consumption, ±20 mA
Price: 44-71 USD
IGBT Power Module, 1200V, 25A, 3-phase full-bridge, fast free-wheel diodes, insulated metal base p...
Price: 64.5-67.5 USD
N channel IGBT, 150A, 1200V, 2U, 1250W, MG150Q2YS51, Toshiba
Price: 4.85-6.85 USD
Field-Programmable Gate Array, 144-TQFP, 1.14 V ~ 1.26 V, XC3S200-4TQG144C
Price: 95-120 USD
MMIC amplifier, 8 V, 31.5dBm, Hermetically Sealed Package, 50Ω
Price: 0.55-0.75 USD
octal Bus Transceiver, SOP-20, 4.5 to 5.5 V, 50 pF, 1 μA, HD74HC245RPEL
Price: 0.001-0.001 USD
single-chip microcomputer, TQFP80, High-speed H8/300L CPU
