PS9634

Number of Channels: 1, Unidirectional
Input Type: DC
Output Type: Push-Pull, Totem Pole
Mounting Type: Through Hole
Package / Case: 8-DIP (0.300", 7.62mm)
Supplier Device Package: 8-DIP
Voltage - Isolation: 5000Vrms
Series: NEPOC
Manufacturer: CEL
Current - DC Forward (If): 30mA
Data Rate: -
Packaging: Bulk
Current - Output / Channel: 300mA
Propagation Delay High - Low @ If: 3ns @ 5ma


Features:

• High instantaneous common mode rejection voltage (CM_H = 1 000 V/ s MIN., CM_L = 1 000 V/ s MIN.)
• High supply voltage (V_CC = 18 V)
• High-speed response (t_PHL, t_PLH = 5 s MAX.)
• High output current (I_O1 = 0.5 A (DC), I_O1P = 1.0 A (pulse) )
• Taping product name (PS9634L-E3, E4)


Application

• Inverter control air conditioner
• General purpose inverter


Pinout




Specifications

PARAMETERS		SYMBOLS	RATING	UNITS
Diode	Forward Current (DC)	IF	30	mA
	Reverse Voltage	VR	6.0	V
	Peak Forward Current *1	IFM	1	A
Detector	Supply Voltage	VCC	18	V
	Output Current (O1)	IO1	0.5	A
	Peak Output Current (O1)	IO1P	1.0
	Output Current (O2)	IO2	0.8
	Peak Output Current (O2)	IO2P	2.0
	Output Voltage (O1)	VO1	18	V
	Power Dissipation	PO	500	mW
Isolation Voltage2		BV	2500	Vr.m.s.
Total Power Dissipation		PT	550	mW
Operating Ambient Temperature		TA	-20 to +80
Storage Temperature		Tstg	-55 to +150

*1 PW = 100 s, Duty Cycle = 1 %
*2 AC voltage for 1 minute at T_A = 25 , RH = 60 % between input and output


Description

The PS9634 and PS9634L are optical linkage devices mounting a GaAs infrared ray LED on the light emitting side (input side) and a photo diode and a signal processing circuit on the light receiving side (output side) on one chip.

PS9634 can directly drive a power transistor of 15 to 20 A class used for such as an inverter control air conditioner or general purpose inverter.

The PS9634L has a surface mount type lead.