PVR1301

Output Type: AC, DC
Relay Type: Relay
Packaging: Tube
Mounting Type: Through Hole
Termination Style: PC Pin
Voltage - Input: 1.2VDC
Voltage - Load: 0 ~ 100 V
Load Current: 400mA
Circuit: DPST (2 Form A)
Supplier Device Package: 16-DIP
On-State Resistance: 5 Ohm
Manufacturer: International Rectifier
Package / Case: 16-DIP (0.300", 7.62mm), 10 Leads
Series: PVR, BOSFET®


Features:

`BOSFET Power IC
`1010 Operations
`300sec Operating Time
`0.2Volt Thermal Offset
`5 milliwatts Pick-Up Power
`1000V/sec dv/dt
`Bounce-Free
`16-pin DIP Package
`-40°C to 85°C


Description

The PVR1301 Photovoltaic Relay is a dual-pole, normally open solid state replacement for electro-mechanical relays. PVR1301 utilizes as an output switch a unique bidirectional (AC or DC) MOSFET power IC termed a BOSFET. The BOSFET is controlled by a photovoltaic generator of novel construction, which is energized by radiation from a dielectrically isolated light emitting diode (LED).

The PVR1301 overcomes the limitations of reed relays by offering the solid state advantages of long life, high operating speed, low pick-up power, bounce-free operation, low thermal voltages and miniaturization.

These advantages allow product improvement and design innovations in many applications such as process control, multiplexing, telecommunications, automatic test equipment and data acquisition. The PVR can switch analog signals from thermocouple level to 100 volts peak AC or DC polarity. Signal frequencies into the RF range are easily controlled and switching rates up to 5kHz are achievable.

The extremely small thermally generated offset voltages allow increased measurement accuracies. Unique silicon technology developed by International Rectifier forms the heart of the PVR. The monolithic BOSFET contains a bidirectional N-channel power MOSFET output structure. In addition, this power IC chip has input circuitry for fast turn-off and gate protection functions. This section of the BOSFET chip utilizes both bipolar and MOS technology to form NPN transistors, P-channel MOSFETs, resistors, diodes and capacitors.

The photovoltaic generator similarly utilizes a unique International Rectifier alloyed multijunction structure. The excellent current conversion efficiency of this technique results in the very fast response of the PVR microelectronic power IC relay.

This advanced semiconductor technology has created a radically new control device. Designers can now develop switching systems to new standards of electrical performance and mechanical compactness.

Parameters:

Technical/Catalog Information	PVR1301
Vendor	International Rectifier
Category	Relays
Mounting Type	Through Hole
Termination Style	PC Pin
Package / Case	16-DIP (300 mil, 10 Leads)
Circuit	DPST (2 Form A)
Load Current	400mA
Voltage - Input	1.2VDC
Voltage - Load	0 ~ 100 V
Output Type	AC, DC
On-State Resistance	5 Ohm
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	PVR1301 PVR1301