PVR1301N

Output Type: AC, DC
Relay Type: Relay
Packaging: Tube
Mounting Type: Through Hole
Termination Style: PC Pin
Voltage - Input: 1.2VDC
Voltage - Load: 0 ~ 100 V
Circuit: DPST (2 Form A)
Supplier Device Package: 16-DIP
On-State Resistance: 5 Ohm
Manufacturer: International Rectifier
Series: PVR, HEXFET;®
Load Current: 360mA
Package / Case: 16-DIP (0.300", 7.62mm), 10 Leads


Features:

 Bounce-Free Operation
 10¹⁰ Off-State Resistance
 1,000 V/sec dv/dt
 0.2 V Thermal Offset
 5 mA Input Sensitivity
 1,500 V_RMS I/O Isolation
 Solid-State Reliability


Application

 Process Control
 Data Acquisition
 Test Equipment
 Multiplexing and Scanning


Specifications

Dielectric Strength: Input-Output		1500	VRMS
Insulation Resistance: Input-Output @ 500VDC		1012
Maximum Capacitance: Input-Output		1.0	pF
Maximum Lead Soldering Temperature (1.6mm below seating plane for 10 sec.)		260	°C
Ambient Temperature Range:	Operating	-40 to +85	°C
	Storage	-40 to +100

Description

The PVR13 Series AC/DC Relay is a dual-pole, normally open, solid-state replacement for electromechanical relays used for general purpose switching of analog signals. It utilizes International Rectifier's HEXFET power MOSFETs as the output switches, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED), which is optically isolated from the photovoltaic generator.

The PVR13 Series overcomes the limitations of both conventional electromechanical and reed relays by offering the solid state advantages of long life, fast operating speed, low pick up power, bounce-free operation, low thermal offset voltages and miniature package. These advantages allow product improvement and design innovations in many applications such as process control, multiplexing, automatic test equipment and data acquisition.

The PVR13 can switch analog signals from thermocouple level to 100 Volts peak AC or DC polarity. Signal frequencies into the RF range are easily controlled and switching rates up to 450Hz are achievable. The extremely small thermally generated offset voltages allow increased measurement accuracies.

These relays are packaged in 16-pin, molded DIP packages and available with through-hole leads, in plastic shipping tubes.

Parameters:

Technical/Catalog Information	PVR1301N
Vendor	International Rectifier
Category	Relays
Mounting Type	Through Hole
Termination Style	PC Pin
Package / Case	16-DIP (300 mil, 10 Leads)
Circuit	DPST (2 Form A)
Load Current	360mA
Voltage - Input	1.2VDC
Voltage - Load	0 ~ 100 V
Output Type	AC, DC
On-State Resistance	5 Ohm
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	PVR1301N PVR1301N