PXF-10

The PXF-10 is designed as process signal to frequency converter. A typical application would be to converter an analog signal from a probe to a pulsating output for input at a digital input of a PLC. Input, output and operating voltage are internally galvanically isolated (3,75KV).

PXF-10 has five features. The first one isinput 0 to 5V / 0 to 10V / -10 to +10Vdc / 0 to 20 / 4 to 20mA in one version. The next one is 2 standard output versions which means output 0 to 50Hz /  0 to 5kHz / 0 to 10kHz - selected via terminals and out 0 to 40Hz / 0 to 4KHz / 0 to 8kHz - selected via terminals. The next one is output offset and gain adjusable +/-5%. The next one is LED indication of input less than that 5% / indication on probe failure. The next one is its operating voltage would be 24Vdc, 24/115Vac or 24/230Vac. That are all the main features.

Some general specifications of PXF-10 have been concluded into several points as follow. The first one is about its ambient temperature range which would be from -20 to 55°C. The next one is about its storage temperature range which would be from -40 to 80°C. The next one is about its mounting which would be 35mm DIN-rail (EN50022). The next one is about its terminals which would be screw terminals with dual compartment. Terminal screws are combined crosshead / slotted. Up to 2 X 2.5mm2 wire (2 X 1.5mm2 inc. ferrule). The next one is about its indicators which would be operating voltage for green LED and input less than 5% of FS. for yellow LED. The next one is about its protection which would be IP20. The next one is about its electric isolation which would be 3.75kVac (1 min) between input, supply and relay output. And so on. For more information please contact us.