QU80386EXTC33

The QU80386EXTC33 is externally compensated and performance can be tailored to the application. QU80386EXTC33se the graphs of small signal gain and phase response as well as the graphs for slew rate and power response as a guide. The compensation capacitor CC must be rated at 350V working voltage. The compensation capacitor and associated resistor RC must be mounted closely to the amplifier pins to avoid spurious oscillation. An NPO capacitor is recommended for compensation.

The QU80386EXTC33 (or mean value) of the delay between the hold command (input clock switched from track to hold state) and the instant at which the analog input is sampled. The time is positive if the clock path delay is longer than the signal path delay. It is negative if the signal path delay is longer than the clock path delay. The time constant of the feedback resistor and bypass capacitor com- bination should match the time constant of the sumpoint resistance and sumpoint capacitance. The timing resistors determine the total timing current, IT, available to charge the timing capacitor. To avoid parasitic pick up, timing resistor leads should be kept as short as possible. For noise environments, unused or deactivated timing terminals should be bypassed to ground through 0.1 µF capacitors. Otherwise, they may be left open.

Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such QU80386EXTC33 and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices.

At present there is not too much information about this model.If you are willing to find more  about QU80386EXTC33, please pay attention to our web! We will promptly update the relevant information.