R4F2153

Features: • Two interrupt control modesAny of two interrupt control modes can be set by means of the INTM1 and INTM0 bits in thesystem control register (SYSCR).• Priorities settable with ICRAn interrupt control register (ICR) is provided for setting interrupt priorities. Priority level...

product image

R4F2153 Picture
SeekIC No. : 004469144 Detail

R4F2153: Features: • Two interrupt control modesAny of two interrupt control modes can be set by means of the INTM1 and INTM0 bits in thesystem control register (SYSCR).• Priorities settable with...

floor Price/Ceiling Price

Part Number:
R4F2153
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/4/29

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Two interrupt control modes
Any of two interrupt control modes can be set by means of the INTM1 and INTM0 bits in the
system control register (SYSCR).
• Priorities settable with ICR
An interrupt control register (ICR) is provided for setting interrupt priorities. Priority levels
can be set for each module for all interrupts except NMI.
• Three-level interrupt mask control
By means of the interrupt control mode, I and UI bits in CCR, and ICR, 3-level interrupt mask
control is performed.
• Independent vector addresses
All interrupt sources are assigned independent vector addresses, making it unnecessary for the
source to be identified in the interrupt handling routine.
• Twenty-nine external interrupts
NMI is the highest-priority interrupt, and is accepted at all times. Rising edge or falling edge
detection can be selected for NMI. Falling-edge, rising-edge, or both-edge detection, or level
sensing, can be selected for IRQn (n = 15, 14, 11, 10, and 7 to 0) and ExIRQm (m = 15 to 0).
• DTC control
The DTC can be activated by an interrupt request.





Specifications

Item Symbol Value Unit
Power supply voltage* (pins
multiplexed with analog input)
VCC 0.3 to +4.3 V
Input voltage (pins multiplexed
with IIC functions)(1)
Vin 0.3 to AVCC +0.3
Input voltage(2) Vin 0.3 to +6.5
Input voltage (except (1), (2) ) Vin 0.3 to VCC +0.3
Reference power supply voltage AVref 0.3 to AVCC +0.3
Analog power supply voltage AVCC 0.3 to +4.3
Analog input voltage
(AN0 to AN7)
VAN 0.3 to AVCC +0.3
Operating temperature Topr 40 to +85
Operating temperature
(when flash memory is
programmed or erased)
Topr 0 to +75
Storage temperature Tstg 55 to +125
Caution: Permanent damage to this LSI may result if absolute maximum ratings are exceeded.
Note: * Voltage applied to the VCC pin.
Make sure power is not applied to the VCL pin.





Description

The interrupt controller R4F2153 has the following registers. For details on the system control register (SYSCR), see section 3.2.2, System Control Register (SYSCR), and for details on the IRQ sense port select registers (ISSR16 and ISSR), see section 8.12.1, IRQ Sense Port Select Register 16 (ISSR16), IRQ Sense Port Select Register (ISSR).
• Interrupt control registers A to D (ICRA to ICRD)
• Address break control register (ABRKCR)
• Break address registers A to C (BARA to BARC)
• IRQ sense control registers (ISCR16H, ISCR16L, ISCRH, and ISCRL)
• IRQ enable registers (IER16 and IER)
• IRQ status registers (ISR16 and ISR)






Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Potentiometers, Variable Resistors
Optical Inspection Equipment
Industrial Controls, Meters
Soldering, Desoldering, Rework Products
Cables, Wires - Management
View more