Features: ·Triple video ampli·er with internal resistors to set gains to +2, +1, and -1·Independently enabled amplifiers·60 MHz -3 dB Bandwidth (AV = 2)·20 MHz ±0.1 dB gain .atness·0.06% differential gain (AV = 2, RL = 150·)·0.06° differential phase (AV = 2, RL = 150·)·High CMRR (75 dB), High PSRR...
RC6704: Features: ·Triple video ampli·er with internal resistors to set gains to +2, +1, and -1·Independently enabled amplifiers·60 MHz -3 dB Bandwidth (AV = 2)·20 MHz ±0.1 dB gain .atness·0.06% differentia...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

| Parameter | Min | Max | Units |
| Positive power supply,VCC | 7 | V | |
| Negative power supply,VEE | -7 | V | |
| Differential input voltage | VEE+2.0 |
VCC(R)-2.0 |
V |
| Operating Temperature | 0 | +70 | |
| Storage Temperature | -40 | ±125 | |
| Junction Temperature | 150 | ||
| Lead Soldering Temperature (10 seconds) | 300 | ||
| Operating Temperature | 0 | +70 | |
| Short circuit tolerance: No more than one output can be shorted to ground. |
The RC6704 consists of three low power, wide band voltage feedback operational amplifiers. Internal thin-film gain set- ting resistors provide gains of +2, +1 and -1. Each channel is capable of delivering a load current of at least 35mA.
Each RC6704 amplifier can be independently enabled or disabled with a TTL or CMOS signal. When disabled, the ampli?er is in a high impedance output state, presenting a very high input to output isolation. The layout is optimized for low channel to channel crosstalk.
The RC6704 amplifiers are optimized for video applications where low differential gain and low phase distortion are significant requirements.