PinoutDescriptionThe RTH010 is unprecedented bandwidth and aperture jitter enable 10-bit 1GS/s sampling of DC to multi-GHz signals.The differential-to-differential dual track-and-hold cascades two track-and-hold circuits,TH1 and TH2. Features of the RTH010 are:(1)9GHz small-signal input bandwidth...
RTH010: PinoutDescriptionThe RTH010 is unprecedented bandwidth and aperture jitter enable 10-bit 1GS/s sampling of DC to multi-GHz signals.The differential-to-differential dual track-and-hold cascades two t...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The RTH010 is unprecedented bandwidth and aperture jitter enable 10-bit 1GS/s sampling of DC to multi-GHz signals.The differential-to-differential dual track-and-hold cascades two track-and-hold circuits,TH1 and TH2.
Features of the RTH010 are:(1)9GHz small-signal input bandwidth;(2)6 GHz large-signal input bandwidth;(3)200-1000MHz sampling rate;(4)-63 dB hold mode distortion (0.5 GHz 1 Vpp VIN);(5)-59 dB hold mode distortion (1.0 GHz 1 Vpp VIN);(6)-45 dB hold mode distortion (3.0 GHz 0.5 Vpp VIN);(7)<100 fs amperture jitter;(8)<250 ps acquisition time;(9)<50 ps rise time (20 to 80%);(10)differential analog input/output;(11)100 to 1000MHz output data rate;(12)output held more than half clock cycle;(13)track mode select.
The absolute maximum ratings of the RTH010 can be summarized as:(1):the parameter is supply voltage VCC to GND,the rated value is -1 to +6,the unit is V;(2):the parameter is supply voltage VEE to GND,the rated value is -6 to +1,the unit is V;(3):the parameter is supply voltage VCC to VEE,the rated value is -1 to +11,the unit is V;(4):the parameter is input voltage INP,INN to GND,the rated value is -1 to +1,the unit is V;(5):the parameter is input voltage CLK1,CLK1B,CLK2,CLK2B to GND,the rated value is -1 to +1,the unit is V;(6):the parameter is input voltage TMS to GND,the rated value is -6 to +1,the unit is V;(7):the parameter is output voltage vterm to GND,the rated value is -2.5 to +3,the unit is V;(8):the parameter is operating temperature,the rated value is -30 to +70,the unit is ;(9):the parameter is case temperature,the rated value is -15 to +85,the unit is ;(10):the parameter is junction temperature,the rated value is +125,the unit is ;(11):the parameter is lead,soldering (10 seconds),the rated value is +220,the unit is ;(12):the parameter is storage temperature,the rated value is -40 to +125,the unit is .