Features: • Wide power supply range: 2 V to 5.5 V• Low current consumption: 1.0 A max. (at 5.5 V, 25)• Typical propagation delay: tPD = 3.7 ns (at 5 V)• High noise immunity: VNIH=VNIL=28% VCC min.• Power down protection: All pins• Very small plastic package: SC-...
S-75V00ANC: Features: • Wide power supply range: 2 V to 5.5 V• Low current consumption: 1.0 A max. (at 5.5 V, 25)• Typical propagation delay: tPD = 3.7 ns (at 5 V)• High noise immunity: ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Item | Symbol | Ratings | Unit |
Power Supply Voltage | VCC | -0.5 to +7.0 | V |
Input Voltage | VIN | -0.5 to +7.0 | V |
Output Voltage | VOUT | -0.5 to VCC+0.5 | V |
Input Parasitic Diode Current | IIK | -20 | mA |
Output Parasitic Diode Current | IOK | ±20 | mA |
Output Current | IOUT | ±25 | mA |
VCC/GND Current | ICC | ±50 | mA |
Power Dissipation | PD | 200 | mW |
Operating Ambient Temperature | Top | -40 to +85 | |
Storage Temp. Range | Tstg | -65 to +150 | |
Lead Temperature (10 s) | TL | 260 |
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
The S-75V00ANC is a single 2-Input NAND Gate fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC's.
All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery backup applications.