Features: • Detection temperature : +60 to +95, 5 step• Detection accuracy : ±2.5• VSS grounded temperature voltage output• Low voltage operation : VDD (min.)=2.2 V• Low current consumption : 15 A typ. (+25)• Output logic level is fixed by the latch after temper...
S-8130AA: Features: • Detection temperature : +60 to +95, 5 step• Detection accuracy : ±2.5• VSS grounded temperature voltage output• Low voltage operation : VDD (min.)=2.2 V• Lo...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.22 - 1.33 / Piece
Fuseholders, Clips, & Hardware 300V 3/16"QC 1 Pos Straight

| Parameter | Symbol | Ratings | Unit |
| Supply voltage (VSS=0.0 V) | VDD | VSS+12 | V |
| Pin voltage | VOUT, VRT, VRESET , VDET, VCD1, VCD2 | VSS−0.3 to VDD+0.3 | V |
| Operating temperature | Topr | −40 to +100 | |
| Storage temperature | Tstg | −55 to +125 |
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions.
The S-8130AA is a temperature switch with a latch function having a built-in semiconductor temperature sensor with the accuracy of ±2.5. The output signal of S-8130AA is inverted when the temperature is detected, and latched until a reset signal input or a detection of the power voltage lowering.Low voltage operation down to 2.2 V is possible and the current consumption is low, 15 A (typ.), due to CMOS configuration.
The S-8130AA consists of a temperature sensor having the temperature coefficient of −13 mV/, a reference voltage source, a comparator, voltage detection circuit, and noise suppression circuit all of which are enclosed in 8-Pin MSOP package.
Available temperature range is between −40 to +100 and wide application in temperature control can be achieved since the output linearity is excellent compared to other sensors including thermistor.