S17065G

The S17065G is designed as one member of the S17 series which are general purpose LP filters. This range of 5-pole Elliptical Function Low Pass Filters is intended for bandwidth limitation with minimal distortion of the transmitted signal. The modest rate of cut off minimises time domain ringing The filters are corrected for Group Delay distortion over 92% of the passband and for loss distortion over the entire passband. Degradation of a composite video signal is small when a 4.5 MHz or 5.5 MHz filter is selected for a 525 or 625 line T.V. system.

Some important electrical characteristics of S17065G are concluded into several points as follow. (1)Its end of passband would be 6.5MHz. (2)Its start of stop of stopband would be 11.18MHz. (3)Its group delay ripple wouldbe 20ns. (4)Its delay time would be 154ns. And so on.

And also some other important data of S17065G are concluded into sveral points as follow. (1)Its impedance would be 75ohms. (2)Its stopband attenuation wrt 100kHz would have the minimum value of 40dB. (3)Its insertion loss at 100kHz would have the maximum value of 1.3dB. (4)Its amplitude ripple in passband would have the maximum value of 0.3dB. It should be noted that video performance for filters of 5.0MHz (4.5MHz for 525 line) and above. (5)Its pulse and bar: K-rating would have the maximum value 1.0%. (6)Its luminance or chrominance gain inequality (20T) would have the maximum value of 3%. (7)Its luminance or chrominance delay inequality (20T) would have the maximum value of 10ns. (8)Its aqueous washable would be yes. (9)Its package would be DR00014A. And so on. At present we have not got so much information about this IC and we would try hard to get more information about it. If you have any question or suggestion please visit our website and contact us for details. Thank you!