S202T02

Circuit: SPST-NO (1 Form A)
Relay Type: Relay
Packaging: Tube
Mounting Type: Through Hole
Termination Style: PC Pin
Output Type: AC, Zero Cross
On-State Resistance: -
Voltage - Input: 1.2VDC
Supplier Device Package: 4-SIP
Load Current: 2A
Package / Case: 4-SIP
Manufacturer: Sharp Microelectronics
Voltage - Load: 0 ~ 240 V
Series: S202


Features:

`  Low height type (height : 16 mm) 30% less compared with S101S05V
`  Effective ON-state current I_T : MAX. 2Ams (Ta=<=40)
`  Model Line-ups
`  Recognized by UL, file No. E94758 Approved by CSA, No. LR63705

Application

·  Programmable controllers
·  Air conditioners
·  Copiers
·  Automatic vending machines

Specifications

Parameter		Symbol	Rating		Unit
			S102T01 /S102T0	S202T01 / S202T02
Inpu	Forward current	IF	50		mA
	Reverse voltage	VR	6		V
Output	RMS ON-state current	IT	8		Arms
	*1 Peak one cycle surge current	VDRM	80		A
	Repetitive peak OFF-state voltage	VDRM	400	600	V
	Non-repetitive peak OFF-state voltage	Isurge	400	600	V
	Critical rate of rise of ON-state current	dIT/dt	40		A/s
	Operating frequency	f	45 to 65		Hz
*2 Isolation voltage		Viso	- 25 to + 100		Vrms
Operating temperature		Topr	- 30 to + 125
Storage temperature		Tstg	3 000
*3 Soldering temperature		Tsol	260(For 10 seconds)

^*1 Refer to Fig. 1.
^*2 60Hz sine wave, start at T_j=25
^*3 Isolation voltage test method
1) Use a dielectric withstand voltage tester with zero cross circuit.
2) The applied voltage waveform shall be sine wave.
3) Apply voltage between input and output.  (Input and output terminals shall be shorted respectively.)


Parameters:

Technical/Catalog Information	S202T02
Vendor	Sharp Microelectronics
Category	Relays
Mounting Type	Through Hole
Termination Style	PC Pin
Package / Case	4-SIP
Circuit	SPST-NO (1 Form A)
Load Current	2A
Voltage - Input	1.2VDC
Voltage - Load	0 ~ 240 V
Output Type	AC, Zero Cross
On-State Resistance	-
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	S202T02 S202T02 425 1253 5 ND 42512535ND 425-1253-5