S2A-T1

The S2A-T1 is designed as one kind of 2.0A surface mount glass passivated rectifiers.

S2A-T1 has seven features. (1)Glass passivated die construction. (2)Ideally suited for automatic assembly. (3)Low forward voltage drop. (4)Surge overload rating to 60A peak. (5)Low power loss. (6)Built-in strain relief. (7)Plastic case material has UL flammability classification rating 94V-O. Those are all the main features.

Some absolute maximum ratings and electrical characteristics of S2A-T1 have been concluded into several points as follow. (1)Its peak repetitive reverse voltage would be 50V. (2)Its working peak reverse voltage would be 50V. (3)Its DC blocking voltage would be 50V. (4)Its RMS reverse voltage would be 35V. (5)Its average rectified output current would be 2.0A. (6)Its non-repetitive peak forward surge curent 8.3ms single half sine-wave superimposed on rated load (JEDEC method) would be 60A. (7)Its forward voltage at If=2.0A would be 1.1V. (8)Its peak reverse current at rated DC blocking voltage would be 5.0uA at Ta=25°C and would be 200uA at Ta=125°C. (9)Its reverse recovery time would be 2.5us. (10)Its typical junction capacitance would be 30pF. (11)Its typical thermal resistance would be 16K/W. (12)Its operating and storage temperature range would be from -55°C to 150°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some mechanical specifications of S2A-T1 are concluded as follow. (1)Its case would be molded plastic. (2)Its terminals would be solder plated, solderable per MIL-STD-750, method 2026. (3)Its polarity would be cathode band or cathode notch. (4)Its marking would be its type number. (5)Its weight would be 0.093 grams approx. And so on. At present we have not got so much information about this IC and we wouldtry hard to get more information about it. If you have any question or suggestion or want to know more information of S2A-T1 please contact us for details. Thank you!