Purchase SA601, In-stock SA601 From SeekIC.
Package Cooled:5000


Part Number: SA601
Package Cooled: 5000
Description: The SA601 is a combined RF amplifier and mixer designed for high-performance low-power communication s...
Package Cooled:5000


Package Cooled: 5000
Description: The SA601 is a combined RF amplifier and mixer designed for high-performance low-power communication s...
The SA601 is a combined RF amplifier and mixer designed for high-performance low-power communication systems from 800-1200MHz. The low-noise preamplifier has a 1.6dB noise figure at 900MHz with 11.5dB gain and an IP3 intercept of -2dBm at the input. The gain is stabilized by on-chip compensation to vary less than ±0.2dB over -40 to +85°C temperature range. The wide-dynamic-range mixer has a 9.5dB noise figure and IP3 of 2dBm at the input at 900MHz. The nominal current drawn from a single 3V supply is 7.4mA. The Mixer can be powered down to further reduce the supply current to 4.4mA.
| SYMBOL | PARAMETER | RATING | UNITS |
| VCC | Supply voltage1 | -0.3 to +6 | V |
| VIN | Voltage applied to any other pin | -0.3 to (VCC + 0.3) | V |
| PD | Power dissipation, TA = 25°C (still air)2 20-Pin Plastic SSOP |
980 | mW |
| TJMAX | Maximum operating junction temperature | 150 | °C |
| PMAX | Maximum power input/output | +20 | dBm |
| TSTG | Storage temperature range | 65 to +150 | °C |
NOTE:
1. Transients exceeding 8V on VCC pin may damage product.
2. Maximum dissipation is determined by the operating ambient temperature and the thermal resistance, JA: 20-Pin SSOP = 110°C/W
3. Pins 9 and 10 are sensitive to electrostatic discharge (ESD).
SA601
PDF/DataSheet Download








