SAB-C515-1R24M

The SAB-C515-1R24M is an upward compatible version of the SAB 80C515A 8-bit microcontroller which additionally provides ALE switch-off capability, on-chip emulation support, ROM protection, and slow down mode capability. With a maximum external clock rate of 24 MHz SAB-C515-1R24M achieves a 500 ns instruction cycle time (1ms at 12 MHz).

The absolute maximum ratings of the SAB-C515-1R24M can be summarized as:(1):the parameter is ambient temperature under bias,the symbol is TA,the rating is -40 to +85,the unit is ;(2):the parameter is storage temperature,the symbol is TST,the rating is -65 to +150,the unit is ;(3):the parameter is voltage on VCC pins with repect to ground,the symbol is VSS,the rating is -0.5 to 6.5,the unit is V;(4):the parameter is voltage on any pins with repect to ground,the symbol is VSS,the rating is -0.5 to VCC+0.5,the unit is V;(5):the parameter is input current on any pin during overload condition,the rating is -10 to +10,the unit is mA;(6):the parameter is absolute sum of all input current during overload condition,the rating is 100,the unit is mA;(7):the parameter is power dissipation,the rating is TBO.

The operating parameters of the SAB-C515-1R24M can be summarized as:(1):the parameter is output high voltage,the symbol is VOH,the min is 2.4,0.9 VCC,the unit is V;(2):the parameter is output low voltage,the symbol is VOL,the max is 0.45,the unit is V;(3):the parameter is input high voltage,the symbol is VIH,the min is 2 VCC+0.9,the max is VCC+0.5,the unit is V;(4):the parameter is intput low voltage,the symbol is VIL,the min is -0.5,the max is 0.2 VCC-0.1,the unit is V;(5):the parameter is logic 0 input current,the symbol is IIL,the min is -10,the max is -70,the unit is A;(6):the parameter is logic 1-to-0 transition current,the symbol is ITL,the min is -65,the max is -650,the unit is A;(7):the parameter is input leakage current,the symbol is ILI,the max is ±1,the unit is A;(8):the parameter is pin capacitance,the symbol is CIO,the max is 10,the unit is pF;(9):the parameter is overload current,the symbol is IOV,the max is ±5,the unit is mA.