DescriptionThe C515A is an upward compatible version of the SAB-C515A-4R24M 8-bit microcontroller which additionally provides an improved 10-bit A/D converter, ALE switch-off capability, on-chip emulation support, ROM protection, and enhanced power saving mode capabilities. With a maximum external...
SAB-C515A-4R24M: DescriptionThe C515A is an upward compatible version of the SAB-C515A-4R24M 8-bit microcontroller which additionally provides an improved 10-bit A/D converter, ALE switch-off capability, on-chip emu...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The C515A is an upward compatible version of the SAB-C515A-4R24M 8-bit microcontroller which additionally provides an improved 10-bit A/D converter, ALE switch-off capability, on-chip emulation support, ROM protection, and enhanced power saving mode capabilities. With a maximum external clock rate of 24 MHz SAB-C515A-4R24M achieves a 500 ns instruction cycle time (1 s at 12 MHz).
The absolute maximum ratings of the SAB-C515A-4R24M can be summarized as:(1):the parameter is ambient temperature under bias,the symbol is TA,the rating is -40 to +125,the unit is ;(2):the parameter is storage temperature,the symbol is Tstg,the rating is -65 to 150,the unit is ;(3):the parameter is voltage on VCC pins with repect to ground,the symbol is VSS,the rating is -0.5 to 6.5,the unit is V;(4):the parameter is voltage on any pins with repect to ground,the symbol is VSS,the rating is -0.5 to VCC+0.5,the unit is V;(5):the parameter is input current on any overload condition,the rating is -10 to 10,the unit is mA;(6):the parameter is absolute sum of all input current during overload condition,the rating is 100,the unit is mA;(7):the parameter is power dissipation,the rating is TBD.
The operating parameters of the SAB-C515A-4R24M can be summarized as:(1):the parameter is output high voltage,the symbol is VOH,the min is 2.4 0.9 VCC,the unit is V;(2):the parameter is output low voltage,the symbol is VOL,the max is 0.45,the unit is V;(3):the parameter is input high voltage,the symbol is VIH,the min is 0.2 VCC+0.9,the max is VCC+0.5,the unit is V;(4):the parameter is intput low voltage,the symbol is VIL,the min is -0.5,the max is 0.2 VCC-0.1,the unit is V;(5):the parameter is logic 0-to-1 current,the symbol is ITL,the min is -65,the max is -650,the unit is A;(6):the parameter is input leakage current,the symbol is ILI,the max is ±1,the unit is A;(7):the parameter is capacitance of I/O buffer,the symbol is CIO,the max is 10,the unit is pF;(8):the parameter is overload current,the symbol is IOV,the max is ±5,the unit is mA.