SAB80C515

SAB 80C515 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 70 °C
SAB 80C515-T3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 to 85 °C
Storage temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 to 150 °C
Voltage on VCC pins with respect to ground (V_SS) . . . . . . . . . . . . . . . . 0.5 to 6.5 V
Voltage on any pin with respect to ground (V_SS) . . . . . . . . . . . . 0.5 to V_CC + 0.5 V
Input current on any pin during overload condition . . . . . . . . . . 10 mA to + 10 mA
Absolute sum of all input currents during overload condition . . . . . . . . . . . . |100 mA|
Power disipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 W
Note Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage of the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for longer periods may affect device reliability. During overload conditions (VI N > VCC or VI N < VSS) the Voltage onVCC pins with respect to ground (VSS ) must not exeed the values defined by the absolute maximum ratings.

The SAB 80C515/80C535 is a powerful member of the Siemens SAB 8051 family of 8-bit microcontrollers. It is designed in Siemens ACMOS technology and is functionally compatible with the SAB 80515/80535 devices designed in MYMOS technology.

The SAB 80C515/80C535 is a stand-alone, high-performance single-chip microcontroller based on the SAB 8051/80C51 architecture. While maintaining all the SAB 80C51 operating characteristics, the SAB 80C515/80C535 incorporates several enhancements which significantly increase design flexibility and overall system performance.

In addition, the low-power properties of Siemens ACMOS technology allow applications where power consumption and dissipation are critical. Furthermore, the SAB 80C515/80C535 has two software-selectable modes of reduced activity for further power reduction: idle and powerdown mode.

The SAB 80C535 is identical with the SAB 80C515 except that it lacks the on-chip program memory. The SAB 80C515/80C535 is supplied in a 68-pin plastic leaded chip carrier package (P-LCC-68) or in a plastic metric quad flat package (P-MQFP-80).

There are versions of SAB80C515 for 12, 16 and 20 MHz operation and for 16 MHz operation and for extended temperature ranges 40 to 85 °C. Versions for extended temperature range 40 to + 110 °C are available on request.