DescriptionThe SAB82284 is a bipolar clock generator/driver which provides clock signals for SAB8086 processors and support components.It also contains logic to supplu READY to the CPU from either asynchronous or synchronization sources and sychronous RESET from an asynchronous input with hysteres...
SAB82284: DescriptionThe SAB82284 is a bipolar clock generator/driver which provides clock signals for SAB8086 processors and support components.It also contains logic to supplu READY to the CPU from either a...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The SAB82284 is a bipolar clock generator/driver which provides clock signals for SAB8086 processors and support components.It also contains logic to supplu READY to the CPU from either asynchronous or synchronization sources and sychronous RESET from an asynchronous input with hysteresis.
The absolute maximum ratings of the SAB82284 can be summarized as:(1):the parameter is ambient temperature under bias,the symbol is TA,the rating is 0 to +70,the unit is ;(2):the parameter is storage temperature,the symbol is TST,the rating is -65 to +150,the unit is ;(3):the parameter is all output and supply voltages,the symbol is VCC,the rating is -0.5 to 7,the unit is V;(4):the parameter is all input voltages,the symbol is VIN,the rating is -0.1 to 5.5,the unit is V;(5):the parameter is power dissipation,the symbol is PD,the rating is 1,the unit is W.
The operating parameters of the SAB82284 can be summarized as:(1):the parameter is output high voltage,the symbol is VOH,the min is 2.4,the unit is V;(2):the parameter is forward input current other inputs,the symbol is IF,the max is -0.5,the unit is mA;(3):the parameter is output low voltage,the symbol is VOL,VCL,the max is 0.45,the unit is V;(4):the parameter is reverse input current other inputs,the symbol is IR,the max is 50,the unit is A;(5):the parameter is input high voltage,the symbol is VIH,the min is 2.0,the unit is V;(6):the parameter is reset input high voltage,the symbol is VIHR,the min is 2.6,the unit is V;(7):the parameter is input forward clamp voltage,the symbol is VC,the max is -1.0,the unit is V;(8):the parameter is power supply current,the symbol is ICC,the max is 145,the unit is mA;(9):the parameter is input LOW voltage voltage,the symbol is VIL,the max is 0.8,the unit is V;(10):the parameter is RES input hysteresis,the symbol is VIHR-VILR,the min is 0.25,the unit is V;(11):the parameter is CLK output high voltage,the symbol is VCH,the min is4.0,the unit is V;(12):the parameter is input capacitance,the symbol is CI,the max is 10,the unit is pF.