SB10100F

The SB10100F is designed as 10A isolation schottky barrier rectifier.

SB10100F has eight features. (1) Plastic package has underwriters laboratory. (2) Flammab ity classification 94V-O utizing. (3) Flame retardant epoxy molding compound. (4) Exceeds environmental standards of MIL-S-19500/228. (5) Low power loss, high efficiency. (6) Low forward voltage, high current capabity. (7) High surge capacity. (8) For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications. That are all the main features.

Some maximum ratings and electrical characteristics of SB10100F(at Ta=25°C unless otherwise specified, single phase, half wave, 60Hz, resistive or inductive load, for capacitive load, derate current by 20%) have been concluded into several points as follow. (1) Its peak repetitive reverse voltage would be 100V. (2) Its working peak reverse voltage would be 100V. (3) Its DC blocking voltage would be 100V. (4) Its RMS reverse voltage would be 80V. (5) Its average rectified output current at Tc=95°C would be 10A. (6) Its non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) would be 150A. (7) Its forward voltage would be 0.85V at If=5.0A. (8) Its peak reverse current at rated DC blocking voltage at Ta=25°C would be 0.5mA and at 100°C would be 50mA. (9) Its typical thermal resistance junction to ambient would be 60°C/W. (10) Its operating and storage temperature range would be from -65°C to +150°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to the device.

Also some mechanical data about SB10100F. (1) Its case is ITO-220AC full molded plastic package. (2) Its terminals is plated leads solderable per MIL-STD-202, method 208. (3) Its polarity is as marked on body. (4) Its weight is 2.24 grams (approx.). (5) Its mounting position would be any. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!

Features of the SB10100F are:(1)plastic package has underwriters laboratory;(2)flammab ity classification 94V-O ut izing;(3)flame reatardant expoxy molding compound;(4)exceeds environmental standard of MIL-S-19500/228;(5)low power loss,high efficiency;(6)low forward voltage,high current capability;(7)high surge capacity;(8)for use in low voltage,high frequency inverters,free wheeling and polarity prolection applications.

Mechanical data of the SB10100F are:(1)case:ITO-220AC full molded plastic package;(2)terminals:leads,solderable per MIL-STD-202,method 208;(3)polarity : as marked;(4)mounting position is any;(5)weight:0.08 ounce,2.24 grams.

The absolute maximum ratings of the SB10100F can be summarized as:(1):the parameter is maximum recurrent peak reverse voltage,the rating is 100,the unit is V;(2):the parameter is maximum RMS voltage,the rating is 80,the unit is V;(3):the parameter is maximum DC blocking voltage,the rating is 100,the unit is V;(4):the parameter is maximum average forward recified current at Tc=25,the rating is 10,the unit is A;(5):the parameter is peak forward surge current,8.3ms single half sine wave superimposed on rated load (JEDEC method),the rating is 150,the unit is A;(6):the parameter is maximum forward voltage at 10.0A per element,the rating is 0.85,the unit is A;(7):the parameter is maximum DC reverse current at Tc=25,the rating is 0.5,the unit is mA;(8):the parameter is DC blocking voltage per element Tc=100,the rating is 50,the unit is mA;(9):the parameter is typical thermal resistance,the rating is 60,the unit is /W;(10):the parameter is operating and storage temperature range,the rating is -55 to +150,the unit is .