SBL10L25

The SBL10L25 is designed as one kind of vishay semiconductors which would be formerly general semiconductor.

SBL10L25 has six features. (1)Plastic package has underwriters laboratory flammability classification 94V-0. (2)Dual rectifier construction, positive center tap. (3)Metal silicon junction, majority carrier conduction. (4)Low power loss, high efficiency. (5)Guardring for overvoltage protection. (6)For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications. Those are all the main features.

Some absolute maximum ratings of SBL10L25 have been concluded into several points as follow. (1)Its maximum repetitive peak reverse voltage would be 25V. (2)Its working peak reverse voltage would be 18V. (3)Its maximum DC blocking voltage would be 25V. (4)Its maximum average forward rectified current would be 10A. (5)Its peak forward surge current 8.3ms single sine-wave superimposed on rated load (JEDEC method) would be 240A. (6)Its peak repetitive reverse current at tp=2us, 1KHz would be 1.0A. (7)Its voltage rate of change rated Vr would be 10000V/us. (8)Its operating junction and storage temperature range would be from -65°C to 150°C. (9)Its RMS isolation voltage from terminals to heatsink with t=1 second, RH<=30% would be 4500V. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of SBL10L25 are concluded as follow. (1)Its maximum instantaneous forward voltage would be 0.46V with conditions of If=10A and Tj=25°C and it would be 0.35V with conditions of If=10A and Tj=125°C. (2)Its maximum instantaneous reverse current at DC blocking voltage would be 0.8mA at Tj=25°C and would be 260mA at Tj=125°C. (3)Its typical thermal resistance from junction to case per leg would be 1.5°C/W. And so on. At present we have not got so much information about this IC and we would try hard to get more information about it. If you have any question or suggestion or want to know more information please contact us for details. Thank you!