SBL3060CT

The SBL3060CT is designed as one kind of 40A schottky barrier rectifiers.

SBL3060CT has seven features. (1)Schottky barrier chip. (2)Guard ring die construction for transient protection. (3)Low power loss, high efficiency. (4)High surge capability. (5)High current capability and low forward voltage drop. (6)For use in low voltage, high frequency inverters, free wheeling and polarity protection application. (7)Plastic material UL flammability classification 94V-0. Those are all the main features.

Some absolute maximum ratings and electrical characteristics of SBL3060CT  have been concluded into several points as follow. (1)Its peak repetitive reverse voltage would be 60V. (2)Its working peak reverse voltage would be 60V. (3)Its DC blocking voltage would be 60V. (4)Its RMS reverse voltage would be 42V. (5)Its average rectified output current would be 30A. (6)Its non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) would be 250A. (7)Its forward voltage drop would be 0.7V. (8)Its peak reverse current at rated DC blocking voltage would be 1.0mA. (9)Its typical junction capacitance would be 420pF. (10)Its typical thermal resistance junction to case would be 2.5°C/W. (11)Its operating temperature range would be from -65°C to 150°C. (12)Its storage temperature range would be from -65°C to 150°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some mechanical specifications of SBL3060CT are concluded as follow. (1)Its case would be molded plastic. (2)Its terminals would be plated leads solderable per MIL-STD-202, method 208. (3)Its polarity would be as marked on body. (4)Its weight would be 2.24 grams (approx). (5)Its mounting position would be any. And so on. At present we have not got so much information about this IC and we would try hard to get more information about it. If you have any question or suggestion or want to know more information please contact us for details. Thank you!