Features: • Low dropout voltage• CMOS/TTL compatible control switch• Very low quiescent current 60A (ON, no load)• Internal thermal shutdown• Short circuit protection• Very low standby current 0.1A maximum (OFF)• Low noise with external bypass capacitor...
SC112: Features: • Low dropout voltage• CMOS/TTL compatible control switch• Very low quiescent current 60A (ON, no load)• Internal thermal shutdown• Short circuit protection...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
• Low dropout voltage
• CMOS/TTL compatible control switch
• Very low quiescent current 60A (ON, no load)
• Internal thermal shutdown
• Short circuit protection
• Very low standby current 0.1A maximum (OFF)
• Low noise with external bypass capacitor
• Industrial temperature range
• Battery powered systems
• Cellular telephones
• Cordless telephones
• Pagers, personal digital assistants
• Portable instrumentation
• Low voltage systems

| Parameter | Symbol | Maximum | Units |
| Input Supply Voltage | VIN | -0.3 to 16 | V |
| Enable Input Voltage | VEN | -0.3 to VIN | V |
| Power Dissipation | Pd | Internally Limited | W |
| Thermal Resistance Junction to Ambient | JA | 230 | °C/W |
| Operating Ambient Temperature Range | TA | -40 to +85 | °C |
| Operating Junction Temperature Range | TA | -40 to +125 | °C |
| Storage Temperature Range | TSTG | -55 to +150 | °C |
| Lead Temperature (Soldering) 10 Sec | TLEAD | 300 | °C |
| ESD Rating (Human | ESD | 2 | kV |
The SC112 is a 150mA ultra low dropout linear regulator with a built in CMOS/TTL logic level enable, designed specifically for battery powered applications where low quiescent current and low dropout are critical for battery longevity.
The SC112 uses a Semtech proprietary internal PNP device for the pass element, providing a low dropout voltage of 130mV at a load of 60mA.
The output noise is reduced to 30V (typical) by placing a very low leakage 10nF capacitor on pin 3 (noise bypass).
Each device contains a bandgap reference, error amplifier, PNP pass element, thermal and current limiting circuitry and resistor divider network for setting output voltage.
The SC112 is packaged in a six lead SOT-23 surface mount package for a very small footprint and it requires only a 1F capacitor on the output and a 0.01F on the bypass pin for a minimum number of external components.