Features: · Programmable hysteresis· 5 bit DAC programmable output (1.050V-1.825V)· On-chip power good and OVP functions· Designed to meet latest Intel specifications· Up to 95% efficiency· +1% tolerance over temperatureApplication⣷...
SC1159: Features: · Programmable hysteresis· 5 bit DAC programmable output (1.050V-1.825V)· On-chip power good and OVP functions· Designed to meet latest Intel specif...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

| Parameter | Symbol | Maximum | Units |
| VIN12V | VIN MAX | -0.3 to 14 | V |
| BOOT to DRVGND | -0.3 to 25 | V | |
| BOOT to BOOTLO | -0.3 to 15 | V | |
| Digital Inputs | -0.3 to 7.3 | V | |
| AGND to DRVGND | ±0.5 | V | |
| LOHIB to AGND | -0.3 to 14 | V | |
| LOSENSE to AGND | -0.3 to 14 | V | |
| IOTLO to AGND | -0.3 to 14 | V | |
| HISENSE to AGND | -0.3 to 14 | V | |
| VSENSE to AGND | -0.3 to 5 | V | |
| Continuous Power Dissipation, TA = 25 | PD | 1.2 | W |
| Continuous Power Dissipation, TC = 25 | PD | 6.25 | W |
| Operating Junction Temperature Range | TJ | 0 to +125 | |
| Lead Temperature (Soldering) 10 Sec. | TL | 300 | |
| Storage Temperature | T STG | -65 to 150 |
The SC1159 is a synchronous-buck switch-mode controller designed for use in single ended power supply applications where efficiency is the primary concern. The controller is a hysteretic type, with a user selectable hysteresis.
The SC1159 is ideal for implementing DC/DC converters needed to power advanced microprocessors such as Pentium® llI and Athlon®, in both single and multiple processor configurations. Inhibit, under-voltage lockout and soft-start functions are included for controlled power-up.
SC1159 features include an integrated 5 bit D/A converter, temperature compensated voltage reference, current limit comparator, over-current protection, and an adaptive deadtime circuit to prevent shoot-through of the power MOSFET during switching transitions. Power good signaling, logic compatible shutdown, and over-voltage protection are also provided. The integrated D/A converter provides programmability of output voltage from 1.050V to 1.825V in 25mV increments.
The SC1159 high side driver can be configured as either a ground-referenced or as a floating bootstrap driver.
The high and low side MOSFET drivers have a peak current rating of 2 amps.