SC26C562C1A

The SC26C562C1A is a single-chip CMOS-LSI communications device that provides two independent, multi-protocol, full-duplex receiver/transmitter channels in a single package. The feature of SC26C562C1A are as follows: (1)Dual full-duplex synchronous/ asynchronous receiver and; (2)transmitter; (3)Multi-protocol operation; (4)Sixteen character receive and transmit FIFOs with interrupt threshold control; (5)Watchdog timer; (6)0 to 10 Mbit/sec data rate; (7)Parity and FCS (frame check sequence LRC or CRC) generation; (8)and checking; (9)Programmable data encoding/decoding: NRZ, NRZI, FM0, FM1,; (10)Manchester; (11)Programmable channel mode: full- or half-duplex, auto-echo, or local loopback.

The absolute maximum ratings of the SC26C562C1A are: (1)Operating ambient temperature2: 0 to +70; (2)Storage temperature: -65 to +150°C; (3)Voltage from VCC to GND3: 0.5 to +7.0V; (4)Voltage from any pin to ground3: 0.5 to VCC +0.5V.

The following is about the electrical characteristics of SC26C562C1A: (1)Input low voltage: 0.8 V ; (2)Input high voltage except X1/CLK: 2.0V min at 0 to 70 and 2.3V at -40 to +85; (3)Output high voltage: 0.5V at IOH = 400A; (4)X2 short circuit current: -15mA at X1 = open, VIN = 0; (5)VIN = VCC; (6)Input low current: -15A min and -0.5A max at VIN = 0; (7)Input leakage current: -1A min and +1A max at VIN = 0 to VCC, 0 to 70; (8)Output off current high, 3-State data bus: +1A max at VIN = VCC, 0 to 70; (9)Power supply current: 25mA typical and 80mA max at 0 to 70.