Features: ± 1% Voltage Accuracy Over-TemperatureLow Shutdown CurrentRuns Off 5V SupplyUltra-Fast Transient ResponseEnable Control for the OutputPower Good Monitoring and Signaling for the OutputGate Drive from Input Supply Enables Use of N-Channel MOSFETUser Selectable Dropout VoltageUnder-Voltage...
SC339: Features: ± 1% Voltage Accuracy Over-TemperatureLow Shutdown CurrentRuns Off 5V SupplyUltra-Fast Transient ResponseEnable Control for the OutputPower Good Monitoring and Signaling for the OutputGate...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.29 - .33 / Piece
Switching Converters, Regulators & Controllers ANA DC-DC EPI80 DIE

| Parameter |
Symbol |
Maximum |
Units |
| Input Supply Voltage |
VIN |
-0.3 to +6 |
V |
| Drive Pins |
VDRV |
-0.3 to VIN + 0.3V |
V |
| Adjust and Power Good Pins |
VADJ , VPGD |
-0.3 to VIN + 0.3V |
Vs |
| Enable Pins |
VEN |
-0.3 to VIN + 0.3V |
V |
| Thermal Impedance Junction to Ambient |
JA |
190 |
°C/W |
| Thermal Impedance Junction to Case |
JC |
81 |
°C/W |
| Operating Ambient Temperature Range |
TA |
-40 to +85 |
°C |
| Operating Junction Temperature Range |
TJ |
-40 to +125 |
°C |
| Storage Temperature Range |
TSTG |
-65 to +150 |
°C |
| Lead Temperature (Soldering) 10 Sec. |
TLEAD |
300 |
°C |
| ESD Rating (Human Body Model) |
VESD |
2 |
°C |
The SC339 is an ultra-low output voltage, linear power supply controller designed to simplify power management for notebook PCs. It is part of Semtech's Smart LDOTM family of products. The SC339 has a user adjustable output that can be set anywhere between 0.5V and 3.3V using two external resistors.
SC339 features include tight output voltage regulation (± 1% over 0°C to +85°C), enable control, open drain power good signal, under-voltage protection and soft-start. The enable pin allows the part to enter a very low power standby mode. Pulling it high enables the output. The power good pin is an open drain and asserts low when the voltage at the adjust pin is below 88% (typ) of nominal. If the voltage at the adjust pin is below 50% (typ) of nominal, the undervoltage protection circuitry will shut down the output. The SC339 is available in a tiny SOT-23 6-pin surface mount package.