SCN-800 series

The SCN-800 series is designed as one kind of 800W single output with parallel function which has some features:(1)2 years warranty;(2)case coating with paint;(3)forced air cooling by built-in DC fan;(4)can adjust from 20 to 100% output  voltage by external control 1-5V;(5)built-in parallel operation function;(6)built-in remote ON-OFF control;(7)built-in remote sense function;(8)high reliability/low ripple noise;(9)protections:short circuit/overload/over voltage/over temp;(10)AC input range selected by switch.

Specification of the SCN-800 series is also very important which can be summarized as:(1)setup,rise,hold up time:800ms,50ms,16ms at full load;(2)voltage range:47 to 63Hz;(3)inrush current(max.):60A/230VAC;(4)leakage current(max.):3.5mA/240VAC;(5)overload:110 to 135% rated output power and the protection type:current limiting,delay shut down o/p voltage,re-power on to recover;(6)special function:DC voltage adj.,remote sensing,remote control, parallel operation (refer to terminal instruction manual);(7)MTBF:120khrs min. MIL-HDBK-217F (25).If you want to know more information such as the electrical characteristics about this part,please download the datasheet in www.seekic.com and www.chinaicmart.com .