PHOTODIODE AVALANCHE 5MM MODULE
SD197-70-74-661: PHOTODIODE AVALANCHE 5MM MODULE
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
| Series: | - | Manufacturer: | Advanced Photonix Inc | ||
| Wavelength: | - | Color - Enhanced: | Blue | ||
| Package / Case : | SSOP-20 | Spectral Range: | 350nm ~ 1050nm | ||
| Diode Type: | Avalanche | Responsivity @ nm: | - | ||
| Response Time: | - | Voltage - DC Reverse (Vr) (Max): | - | ||
| Current - Dark (Typ): | - | Active Area: | 5mm Diameter | ||
| Viewing Angle: | - | Operating Temperature: | 0°C ~ 40°C |
| SYMBOL | PARAMETER | MIN | MAX | UNITS |
| +/- 12 VS | Voltage Supplies | +/-11 | +/-13 | V |
| +5 VS | +4.75 | +5.25 | ||
| TSTG | Storage Temperature | 40 | +70 | |
| TO | Operating Temperature | 0 | +40 |
*All specifications apply when APD is at 0 with a gain of 300 and a load resistance of 50 ohms. Typical HV divider Ratio and voltage gain is 404. Recommended load on amplifier output is from 50ohms to 1Mohm. Devices must be mounted to a heat sink with TEC on.
**To activate the external bias control (blue wire), turn the gain adjust fully counter clockwise and place a jumper across J1 the external bias select connector. Input voltage on blue wire 0 to 5 volts. The module must be operated with a heat sink
The SD 197-70-72-661 module Incorporates a 10mm cooled APD, TEC controller, HV supply, and two stage preamplifier, in a small package
| Technical/Catalog Information | SD197-70-74-661 |
| Vendor | Advanced Photonix Inc |
| Category | Sensors, Transducers |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | SD197 70 74 661 SD1977074661 |