Features: ·For surface mounted applications·Low profile package·Built-in strain relief·Easy pick and place·Ultrafast recovery times for high efficiency·Plastic package has Underwriters Laboratory Flammability classification 94V-0·High temperature soldering:260 /10 seconds at terminalsSpecification...
SE3M: Features: ·For surface mounted applications·Low profile package·Built-in strain relief·Easy pick and place·Ultrafast recovery times for high efficiency·Plastic package has Underwriters Laboratory Fl...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Ratings at 25 ambient temperature unless otherwise specified.Resistive or inductive load.For capacitive load, derate current by 20%.
Symbols | SE3A | SE3B | SE3D | SE3E | SE3G | SE3J | SE3K | SE3M | Units | |
Maximum repetitive peak reverse voltage |
VRRM |
50 |
100 |
200 |
300 |
400 |
600 |
800 |
1000 |
Volts |
Maximum RMS voltage |
VRMS |
35 |
70 |
140 |
210 |
280 |
420 |
560 |
700 |
Volts |
Maximum DC blocking voltage |
VDC |
50 |
100 |
200 |
300 |
400 |
600 |
800 |
1000 |
Volts |
Maximum average forward rectified current at TL=75 |
I(AV) |
1.0 |
Amps | |||||||
Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) TA=55 |
IFSM |
100.0 |
Amps | |||||||
Maximum instantaneous forward voltage at 1.0A |
VF |
1.00 |
1.30 |
1.50 |
1.70 |
Volts | ||||
Maximum DC reverse current TA=25 at rated DC blocking voltage TA=100 |
IR |
10.0 |
A | |||||||
Maximum Reverse recovery time (Note 1) TJ=25 |
Trr |
50 |
100 |
nS | ||||||
75.0 |
50.0 |
pF | ||||||||
Typical junction capacitance (Note 2) |
CJ | |||||||||
Maximum thermal resistance (Note 3) |
RJL |
15 |
/W | |||||||
Operating and storage temperature range |
TJ, TSTG |
-50to+150 |
Notes:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts
(3) 8.0mm2 (0.013mm thick) land areas