High Speed Optocouplers 1Mbd Open Collector Single Channel
SFH6316T: High Speed Optocouplers 1Mbd Open Collector Single Channel
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.15 - .23 / Piece
Transistor Output Optocouplers Phototransistor Out Single CTR > 40-80%
| Current Transfer Ratio : | 35 % | Maximum Baud Rate : | 1 Mbps | ||
| Maximum Forward Diode Voltage : | 1.8 V | Maximum Reverse Diode Voltage : | 3 V | ||
| Maximum Input Diode Current : | 25 mA | Maximum Power Dissipation : | 100 mW | ||
| Maximum Operating Temperature : | + 70 C | Minimum Operating Temperature : | 0 C | ||
| Package / Case : | SOIC-8 | Packaging : | Reel |
The SFH6315T/SFH6316T/43T, high speed optocouplers, each consists of a GaAlAs infrared emitting diode, optically coupled with an integrated photodetector and a high speed transistor. The photodetector is junction isolated from the transistor to reduce miller capacitance effects. The open collector output function allows circuit designers to adjust the load conditions when interfacing with different logic systems such as TTL, CMOS, etc.
Because the SFH6316T has a Faraday shield on the detector chip, it can also reject and minimize high input to output common mode transient voltages. There is no base connection, further reducing the potential electrical noise entering the package.
The SFH6315T/SFH6316T/43T are packaged in industry standard SOIC-8 packages and are suitable for surface mounting.