Purchase SG1525A, In-stock SG1525A From SeekIC.
Part Number: SG1525A
Description: The SG1525A/1527A series of pulse width modulator integrated circuits are designed to offer improved performance and lo...
- Table of contents:
SG1525A
-
Suppliers
DataSheet
General Description
SG1525A General Description
The SG1525A/1527A series of pulse width modulator integrated circuits are designed to offer improved performance and lower external parts count when usedto implement all types of switching power supplies. The on-chip +5.1 volt reference is trimmed to !à1% initial accuracy and the input common-mode range of the erro amplifier includes the reference voltage, eliminating external potentiometers and divider resistors. A Sync input to the oscillator allows multiple units to be slaved together, or a single unit to be synchronized to an external system clock. A single pin and the Discharge pin provides a wide range of deadtime resistor between the CT adjustment. These devices also feature built-in soft-start circuitry with only a timingcapacitor required externally. A Shutdown pin controls both the soft-start circuitry and the output stages, providing instantaneous turn-off with soft-start recycle for slow turn-on. These functions are also controlled by an undervoltage lockout which keeps the outputs off and the soft-start capacitor discharged for input voltages less than that required for normal operation. Another unique feature of these PWM circuits is a latch following the comparator. Once a PWM pulse has been terminated for any reason, the outputs will remain off for the duration of the period. The latch is reset with each clock pulse. The output stages are totem-pole designs capable of sourcing or sinking in excess of 200mA. The SG1525A output stage features NOR logic, giving a LOW output for an OFF state. The SG1527A utilizes OR logic which results in a HIGH output level when OFF.
SG1525A Maximum Ratings
Supply Voltage (+Vin) .......................................................40V
Collector Supply Voltage (Vc) ........................................... 40V
Logic Inputs ....................................................... -0.3V to 5.5V
Analog Inputs ....................................................... -0.3V to Vin
Output Current, Source or Sink ................................... 500mA
Reference Load Current ............................................... 50mA
Oscillator Charging Current ............................................ 5mA
Operating Junction Temperature Range
Hermetic (J, L Packages) ..................................... 150
Plastic (N, DW Packages ) ....................................... 150
Storage Temperature Range .......................... -65 to 150
Lead Temperature (Soldering, 10 seconds) ................. 300
Note 1. Values beyond which damage may occur.
SG1525A Features
8V to 35V operation
5.1V reference trimmed to ±1%
100Hz to 500KHz oscillator range
Separate oscillator sync terminal
Adjustable deadtime control
Internal soft-start
Input undervoltage lockout
Latching P.W.M. to prevent multiplepulses
Dual source/sink output drivers
SG1525A Typical Application
1. Use an external transistor or open-collector comparator to pul down on the Comp terminal. This will set the PWM latch turningoff both outputs. If the shutdown signal is momentary, pulse-by-pulse protection can be accomplished as the PWM latch wil be reset with each clock pulse.
2. The same results can be accomplished by pulling down on the Soft-Start terminal with the difference that on this pin, shutdownwill not affect the amplifier compensation network but must discharge any Soft-Start capacitor.
3. Apply a positive-going signal to the Shutdown terminal. This will provide most rapid shutdown of the outputs but will not immediately set the PWM latch if there is a Soft-Start capacitor.This capacitor will discharge but with a current of approxi-mately twice the charging current.
4. The shutdown terminal can be used to set the PWM latch on a pulse-by-pulse basis if there is no external capacitance on Soft-Start terminal. Slow turn-on may still be accomplished by applying an external capacitor, blocking diode, and charging resistor to the comp terminal. (See SG1524 Application Note).
SG1525A
PDF/DataSheet Download
- Datasheet: SG1525A
- File Size: 139064 KB
- Manufacturer: MICROSEMI [Microsemi Corporation]
- Click here to Download
- ·SG1000GXH26
- Toshiba
- INVERTER APPLICATION
- 211366 KB
- ·SG105
- KODENSHI [KODENSHI KOREA CORP.]
- PHOTOINTERRUPTERS
- 86479 KB
- ·SG105F
- KODENSHI [KODENSHI KOREA CORP.]
- PHOTOINTERRUPTERS
- 90931 KB
- ·SG107F3
- ETC [ETC]
- Reflective sensor combines a GaAs IRED with a high-sensitivity phototransistor
- 132508 KB
- ·SG109
- MICROSEMI [Microsemi Corporation]
- 5 -VOLT FIXED VOLTAGE REGULATORS
- 51727 KB
- ·SG109IG
- MICROSEMI [Microsemi Corporation]
- 5 -VOLT FIXED VOLTAGE REGULATORS
- 51727 KB
- ·SG109IG/883B
- MICROSEMI [Microsemi Corporation]
- 5 -VOLT FIXED VOLTAGE REGULATORS
- 51727 KB
- ·SG109K
- MICROSEMI [Microsemi Corporation]
- 5 -VOLT FIXED VOLTAGE REGULATORS
- 51727 KB
SG1525A Relative Products
SG1524J
IC PWM REGULATING SW PS 16-DIP
SG1524BJ
IC PWM REGULATING SW PS 16-DIP
SG1524B
The SG1524B is a pulse width modulator for switching power supplies which features improved performance over industry standards like the SG1524. A direct pin-for-pin replacement for the earlier device, it combines advanced processing techniques and circuit d...
SG1524
The SG1524contains all the control circuitry for a regulating power supply inverter or switching regulator. Included in a 16- pin dual-in-line package is the voltage reference, error amplifier, oscillator, pulse width modulator, pulse steering flip-flop, dua...
SG150I-M0
CABLE TIE MINI BLK 6.2"
SG150I-M
CABLE TIE MINI NAT 6.2"
Hotspot Suppliers Product
MRF1535
Price: 15-18 USD
TO-272-6, RF power field effect transistor, N channel, enhancement-mode lateral MOSFET, 13 inch, 6...
TLP181GB
Price: 1-1000000 USD
4-SMD, 1.15 V, 1V, mini flat coupler, Photocoupler, GaAs Ired & Photo-Transistor
BAV99
Price: 0.01-0.02 USD
SurfaceMount, SOT-23-3, 100V, 215MA, switching diode
LM2575S-12/NOPB
Price: 0.19-2.99 USD
1A Step-Down Voltage Regulator, TO-263, low power standby mode, High Efficiency
2SC5707
Price: 1-4 USD
silicon NPN triple diffusion mesa type, High Current Switching, T0-251, 1500V, 150W, High breakdow...
MG100G2YS1
Price: 30-50 USD
MG100G2YS1, 100A, 450V, Toshiba
PH50S24-15
Price: 76-107 USD
Simple function, 50 to 600W, DC-DC converter, 20mV, Overload Protection
G1445F51U
Price: 0.15-0.21 USD
2.6W Mono Audio Amplifier TSSOP-8 G1445F51U
DS1804Z-010
Price: 0.8-2.5 USD
nonvolatile digital potentiometer, SOP8, -1.0V to +6.0V, 100kΩ, On-Demand Wiper Storage
LA100-P
Price: 20-25 USD
Current Transducer, 100A, 2.5kV
82S129/BEA
Price: 30-31 USD
1K bit TTL bipolar PROM, CDIP, On-chip address decoding, Two chip enable inputs, Output options
LF412MJ/883
Price: 2-5 USD
Low Offset, Low Drift, Dual JFET Input Operational Amplifier, CDIP8, 50 pA input bias current, 3 M...
