SG3525

The SG3525A, SG3527A pulse width modulator control circuits offer improved performance and lower external parts count when implemented for controlling all types of switching power supplies. The onchip +5.1 V reference is trimmed to ±1% and the error amplifier has an input commonmode voltage range that includes the reference voltage, thus eliminating the need for external divider resistors. A sync input to the oscillator enables multiple units to be slaved or a single unit to be synchronized to an external system clock. A wide range of deadtime can be programmed by a single resistor connected between the CT and Discharge pins. These devices also feature builtin softstart circuitry, requiring only an external timing capacitor. A shutdown pin controls both the soft start circuitry and the output stages, providing instantaneous turn off through the PWM atch with pulsed shutdown, as well as softstart recycle with longer shutdown commands. The under voltage lockout inhibits the outputs and the changing of the softstart capacitor when VCC is below nominal. The output stages are totem pole design capable of sinking and sourcing in excess of 200 mA. The output stage of the SG3525A features NOR logic resulting in a low output for an offstate while the SG3527A utilized OR logic which gives a high output when off.