Features: Over-voltage protection (OVP) for 3.3V, 5V and12V Over-current protection (OCP) for 3.3V, 5V and 12V Under-voltage sense (UVS) for 3.3V, 5V and 12V Under-voltage protection (UVP) for 12V Open drain output for PGO and FPO pins 300mS power good delay 75mS delay for 3.3V, 5V and 12V power ...
SG6513/T: Features: Over-voltage protection (OVP) for 3.3V, 5V and12V Over-current protection (OCP) for 3.3V, 5V and 12V Under-voltage sense (UVS) for 3.3V, 5V and 12V Under-voltage protection (UVP) for 12V ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

|
Parameter |
Symbol |
Unit |
Min |
Max |
|
DC Supply Voltage |
VDD |
V
|
-0.3
|
16 |
|
Input Voltage |
Vi
|
V |
-0.3 |
8 |
|
Output Voltage |
VOUT |
V |
-0.3 |
16 |
|
Operating Free Air Temperature Range |
TA |
-0.3 |
8 | |
|
Storage Temperature Range |
TSTG |
-40 |
8.5 | |
|
Soldering Temperature |
Vdc |
-55 |
85 | |
|
ESD Capability, HBM model |
Vdc |
KV |
150 |
SG6513/T is designed to provide the voltage, current and temperature supervisor function, remote on/ PSON) function, power good (PGO) indicator function,and fault protection (FPO) function for switching power systems.
For supervisor function, SG6513/T provides the over voltage protection (OVP) monitoring for 3.3V, 5V and 12V; over current (OCP) monitoring for 3.3V, 5V and 12V; under voltage sense (UVS) monitoring for 3.3V, 5V and 12V; under voltage protection (UVP) monitoring for 12V; and over temperature protection (OTP) for SG6513/T. When 3.3V, 5V or 12V voltage is decreasing to 2.8V, 4.2V and 9.9V respectively, the under voltage sense (UVS) function will be enabled to reset the PGO signal from high to low. If 12V voltage is further decreasing to 9V, FPO will be set to high to turn off the PWM controller IC. The voltage difference across external current shunt of SG6513/T is used for OCP functions. An external resistor can be used to adjust protection threshold. To achieve better immunity for lighting surge glitch and to prevent accidental power shut down during dynamic loading condition, the de-bounce time for UVP/OCP and UVS is 275us/125us ,350us respectively. The deglitch time for OVP is 75uS for better noise immunity.