SGS35DB070D

The SGS35DB070D is designed as one kind of half bridge NPN darlington power modules. Its typical applications include motor control, high power SMPS and UPS, high power DC/DC and DC/AC converters.

SGS35DB070D has four features. (1)Power module with internall isolation (2500Vrms). (2)Low Rth junction to case. (3)Freewheeling diode. (4)Adapted for high power switching applications.

Some absolute maximum ratings of SGS35DB070D have been concluded into several points as follow. (1)Its collector to emitter voltage Ib=0 would be 700V. (2)Its collector to emitter voltage Vbe=0V would be 1000V. (3)Its collector to emitter voltage Vbe=-2V would be 1000V. (4)Its collector to base voltage Ie=0 would be 1000V. (5)Its emitter to base voltage would be 7V. (6)Its collector current would be 35A. (7)Its reverse collector current would be 35A. (8)Its base current would be 10A. (9)Its collector surge current would be 350A. (10)Its total dissipation at Tc=25°C would be 400W. (11)Its storage temperature range would be from -55°C to 150°C. (12)Its max operating junction temperature would be 150°C. (13)Its insulation withstand voltage (AC-RMS) would be 2500V. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of SGS35DB070Dare concluded as follow. (1)Its collector cutoff current Vbe=0 would be max 2mA at Vce=1000V and would be max 10mA at Vce=700V at Tj=125°C. (2)Its collector cutoff current Vbe=-2V would be max 2mA at Vce=1000V and would be max 10mA at Vce=700V at Tj=125°C. (3)Its emitter cutoff current Ic=0 would be max 150mA. (4)Its collector to emitter saturation voltage would be typ 1.7V and max 3V. (5)Its base to emitter saturation voltage would be typ 2.1V and max 3.5V. (6)Its DC current gain would be min 16 and typ 35 at Ic=35A and Vce=5V. And so on. If you have any question or suggestion or want to know more information of SGS35DB070D please contact us for details. Thank you!