SI-3011ZF

• 3 A Output Current
• 0.7 V Maximum Dropout Voltage at IO = 3 A
• 1 µA Maximum Standby Current
• Adjustable 1.1 ~ 5 V Output Voltage
• Remote Voltage Sensing
• Foldback Current Limiting
• Thermal Protection

• TVs, VCRs, Electronic Games
• Embedded Core, Memory, or Logic Supplies
• Printers and Other Office Equipment
• Industrial Machinery
• Secondary-Side Stabilization of Multi-Output SMPS

Designed to meet the high-current requirements in industrial and consumer applications; embedded core, memory, or logic supplies; TVs, VCRs, and office equipment, the SI-3011ZF voltage regulator offers the reduced dropout voltage and low quiescent current essential for improved efficiency. This device delivers a regulated output at up to 3 A. Integrated thermal and overcurrent protection enhance overall system reliability. Devices with fixed output voltages of 2.5 V or 3.3 V are also available.

Quiescent current does not increase significantly as the dropout voltage is approached, an ideal feature in standby/resume power systems where data integrity is crucial. Regulator accuracy and excellent temperature characteristics are provided by a bandgap reference. An LS-TTL/CMOS-compatible input gives the designer complete control over power up, standby, or power down. A pnp pass element provides a dropout voltage of less than 700 mV at 3 A of load current. Low output voltages eliminate the need for expensive PWM buck converters. The low dropout voltage permits more efficient regulation before output regulation is lost.

This device is supplied in a fully molded TO-220-style 5-lead flange-mounted, high power, isolated plastic package. A similar device in a lower-power surface-mount plastic package is the SI-3011ZD.

Input Voltage, V_I . . . . . . . . . . . . . .10 V
Output Current, I_O . . . . . . . . . . . . . 3 A*
Enable Input Voltage, V_E . . . . . . . . 6 V
Junction Temperature, T_J . . . . +125°C
Storage Temperature Range,
T_S . . . . . . . . . . . . -40°C to +125°C
* Output current rating is limited by input voltage, duty cycle, and ambient temperature.Under any set of conditions, do not exceed a junction temperature of +125°C.

Designed to meet the high-current requirements in industrial and consumer applications; embedded core, memory, or logic supplies; TVs, VCRs, and office equipment, the SI-3011ZF voltage regulator offers the reduced dropout voltage and low quiescent current essential for improved efficiency. SI-3011ZF delivers a regulated output at up to 3 A. Integrated thermal and overcurrent protection enhance overall system reliability. Devices with fixed output voltages of 2.5 V or 3.3 V are also available.

Quiescent current of SI-3011ZF does not increase significantly as the dropout voltage is approached, an ideal feature in standby/resume power systems where data integrity is crucial. Regulator accuracy and excellent temperature characteristics of SI-3011ZF are provided by a bandgap reference. An LS-TTL/CMOS-compatible input gives the designer complete control over power up, standby, or power down. A pnp pass element provides a dropout voltage of less than 700 mV at 3 A of load current. Low output voltages eliminate the need for expensive PWM buck converters. The low dropout voltage of SI-3011ZF permits more efficient regulation before output regulation is lost.

SI-3011ZF is supplied in a fully molded TO-220-style 5-lead flange-mounted, high power, isolated plastic package. A similar device in a lower-power surface-mount plastic package is the SI-3011ZD.