SL2009KG

The SL2009KG is designed as a dual IF amplifier intended for application in cable tuners, and integrates all of the IF gain and AGC required to deliver 1Vpp in a standard tuner configuration. SL2009KG typical applications include cable Network interface modules and tuners and data communications systems.

SL2009KG has five features. (1)Single chip solution for tuner IF gain and AGC. (2)Contains 34dB of AGC shared between two AGC stages. (3)Design optimised for high signal handling with low inter-modulation spurious generation. (4)I/O ports optimised to interface with standard SAW filters. (5)ESD protection (Normal ESD handling procedures should be observed). Those are all the main features.

Some absolute maximum ratings of SL2009KG have been concluded into several points as follow. (1)Its supply voltage would be min -0.3V and max 7V. (2)Its all I/O port DC offsets would be min -0.3V and max Vcc+0.3V. (3)Its storage temperature range would be from -55°C to 150°C. (4)Its junction temperature would be max 150°C. (5)Its package thermal resistance chip to case would be max 32.2°C. (6)Its package thermal resistance chip to ambient would be max 108.1°C/W. (7)Its power consumption at 5.25V would be max 368mW. (8)Its ESD protection would be min 2kV. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of SL2009KG are concluded as follow. (1)Its supply current would be typ 50mA and max 70mA. (2)Its operating frequency would be min 30MHz and max 50MHz. (3)Its gain flatness would be max 1dB. (4)Its input impedance would be typ 2kohms. (5)Its variation in NF with gain adjust would be max -1dB/dB. (6)Its output referred IP3 would be min 3dBV. (7)Its output impedance would be typ 50ohms. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!