SLE24C32-P

Stresses above those listed here may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this data sheet is not implied.Exposure to absolute maximum ratings for extended periods may affect device reliability.

The SLx 24C32 device is a serial electrically erasable and programmable read only memory (EEPROM), organized as 4096 ´ 8 bit. The data memory is divided into 128 pages. The 32 bytes of a page can be programmed simultaneously.

The device SLx 24C32 conforms to the specification of the 2-wire serial I2C-Bus. Three chip select pins allow the addressing of 8 devices on the I²C-Bus. Low voltage design permits operation down to 2.7 V with low active and standby currents. All devices have a minimum endurance of 10⁶ erase/write cycles1).

The device SLx 24C32 operates at 5.0 V ± 10% with a maximum clock frequency of 400 kHz and at 2.7 ... 5.5 V with a maximum clock frequency of 100 kHz. The device with a voltage range of 2.7 . 5.5. V is available in two temperature ranges for industrial and automotive applications. The EEPROMs are mounted in eight-pin DIP and DSO packages or are also supplied as chips.