SMCGLCE6.5A

Features:

`Available in standoff voltage range of 6.5 to 200 V
`Low capacitance of 100 pF or less
`Molding compound flammability rating: UL94V-O
`Two different terminations available in C-bend (modified JBend with DO-214AB) or Gull-wing (DO-215AB)
`Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part
   numbers
`Optional 100% screening for avionics grade is available by adding MA prefix to part number for 100% temperature cycle 55ºC to 125ºC (10X) as well as surge (3X) and
   24 hours HTRB with post test VBR & IR `RoHS Compliant devices available by adding an "e3" suffix


Application

·1500 Watts of Peak Pulse Power at 10/1000 s
·Protection for aircraft fast data rate lines per select level waveforms in RTCA/DO-160D & ARINC 429
·Low capacitance for high speed data line interfaces
·IEC61000-4-2 ESD 15 kV (air), 8 kV (contact)
·IEC61000-4-5 (Lightning) as further detailed in LCE6.5 thru LCE170A data sheet
·T1/E1 Line Cards
·Base Stations
·WAN Interfaces
·XDSL Interfaces
·CSU/DSU Equipment


Specifications

`1500 Watts of Peak Pulse Power dissipation at 25oC with repetition rate of 0.01% or less*
`Clamping Factor: 1.4 @ Full Rated power 1.30 @ 50% Rated power
`tclamping (0 volts to V(BR) min): Less than 5x10-9 seconds
`Operating and Storage temperatures: -65 to +150oC
`Steady State power dissipation: 5.0W @ TL = 50oC
`THERMAL RESISTANCE: 20oC/W (typical junction to lead (tab) at mounting plane * When pulse testing, do not pulse in opposite direction (see "Schematic Applications"
   section herein and Figures 5 & 6 for further protection in both directions)


Description

This surface mount Transient Voltage Suppressor (TVS) SMCGLCE6.5A product family includes a rectifier diode element in series and opposite direction to achieve low capacitance below 100 pF. They are also available as RoHS Compliant with an e3 suffix. The low TVS capacitance may be used for protecting higher frequency applications in inductive switching environments or electrical systems involving secondary lightning effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics. SMCGLCE6.5A also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. If bipolar transient capability is required, two of these low capacitance TVS devices may be used in parallel and opposite directions (anti-parallel) for complete ac protection (Figure 6).