SN54BCT543

Pinout




Specifications

Supply voltage range, V_CC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 7 V
Input voltage range: Control inputs (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 7 V
                                  I/O ports (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  0.5 V to 5.5 V
Voltage range applied to any output in the disabled or power-off state, V_O. . . . . . . . . 0.5 V to 7 V
Voltage range applied to any output in the high state, V_O . . . . . . . . . . . . . . . . . . . . . . 0.5 V to V_CC 
Input clamp current, I_IK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  30 mA
Current into any output in the low state: SN54BCT543 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  96 mA
                                                                 SN74BCT543. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  128 mA
Operating free-air temperature range: SN54BCT543  . . . . . . . . . . . . . . . . . . . . . . . 55°C to 125°C
                                                             SN74BCT543 . . . . . . . . . . . . . . . . . . . . . . . . . . .   0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.


Description

The SN54BCT543 octal transceiver contains two sets of D-type latches for temporary storage of data flowing in either direction. Separate latch-enable (LEAB or LEBA) and output-enable (OEAB or OEBA) inputs of SN54BCT543 are provided for each register to permit independent control in either direction of data flow.


The A-to-B enable (CEAB) input of SN54BCT543 must be low in order to enter data from A or to output data from B. If CEAB is low and LEAB is low, the A-to-B latches are transparent; a subsequent low-to-high transition of LEAB puts the A latches in the storage mode. With CEAB and OEAB both low, the 3-state B outputs of SN54BCT543 are active and reflect the data present at the output of the A latches. Data flow from B to A is similar but requires using the CEAB, LEBA, and OEBA inputs.


The SN54BCT543 is characterized for operation over the full military temperature range of 55°C to 125°C. The SN74BCT543 is characterized for operation from 0°C to 70°C.